User manual MCINTOSH UR12

[. . . ] Owners Manual UR12 Touch Screen Remote UR12 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 WARNING - TO REDUCE RISK OF DAMAGE, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. Care of Equipment: 11. Do not permit objects or liquids of any kind to be, spilled and/or fall onto the equipment. [. . . ] Point the remote control toward the component and enter the three-digit code number you selected for your component from the Code Table on pages 32-43. Please enter the code number within 20 seconds of program- System Settings MAIN and PAGE buttons simultaneously. You will be in the setting mode once again. TO EXIT and press the cursor down or simply press the MAIN button to exit to main menu. Manually turn on the component you plan to operate. Go to program setting mode in the remote control by pressing both the MAIN and PAGE buttons simultaneously for five seconds. Using the joystick, move the cursor down in the Touch Screen to 3. Push the joystick down to enter the preprogram mode. Select the device you wish to program in the Touch Screen (eg. To program TV, press the TV Device Touch-button). Select the device from which the three digit code number will be selected from (eg. If it is from the TV code table, press the TV Device Touch-button). Point the remote control to the component and press the BRAND button. Press the number button on the Touch Screen that corresponds with the first alphabetical character of your brand name. Please press the number button within 20 seconds of programming. Please note that pressing the number 19 Figure 12 ming. If there is more than one code number assigned to your brand, try one code number at a time until you find the right code number. If you entered the right code number, the component will turn off right after you entered the number. When the right code number is entered, save the code by pressing the SAVE button on Touch-button. Confirm that you entered the right code number that matches your component by pressing other buttons such as POWER, VOLUME, MUTE and CHANNEL. If any of the buttons do not operate as they should, please repeat from Step 5. Continue to program other components by repeating from the above step 5. [. . . ] So please take a minute to fill out and return the Registration Card now, before you become too distracted by the great sounds coming from your new McIntosh Product! elcome to the family of McIntosh owners. This is the Warranty for your new McIntosh Home Electronic Product (the Product). Your Product has been designed to give many years of trouble-free performance. Nonetheless, failures do sometimes occur even with equipment as wellbuilt as McIntoshs. [. . . ]