User manual MEDELI DD505

[. . . ] DIGITAL DRUM Instruction Manual Thank you for purchasing this digital drum module. The drum module has been developed to act and play like a drum set but with greater ease. Before you use the instrument, we recommend you to read through this manual. Congratulatons! Taking Care of Your Digital Drum Set Location Do not expose the unit to the following conditions to avoid deformation, discoloration, or more serious damage. High temperature (near a heat source, or in a car during the day time). [. . . ] *When playing the metronome: The metronome stops immediately when holding down [ click ] button, and pressing the [ + ] or [ - ] buttons on the click sound. *Volume of the click sound will be reset to default once power is on. Beat indicator 8 Play a Song Select a song This drum module has a total of 50 preset songs. Note: The preset song setting is 001 after you slide on power. The song indicator lights and the current song's number appears. Press [ + ] or [ - ] buttons to select one of the song and listen to it. Song numbers 001 - 050 are preset songs. (Reference song list : page 16. ) Song indicator Listen to the song 1. Press [ start/stop ] button and the beat indicator is flashing. After the counting, the song will start playback from the beginning. The song will stop when it reaches the end. You can stop the song during playback by pressing the [ start/stop ] button. * The ASSIGN pad's indicator flashes at the first beat of each measure. Note: The ASSIGN pad's indicator can be lighted off by pressing both [hi-hat] and [kick] buttons at the same time. Beat indicator Adjust the song's volume 1. Press the [ song / volume ] button to select the volume of song. Press [ + ] or [ - ] buttons to adjust the volume of song accompaniment. Adjust the song's tempo 1. Press the [ tempo + ] or [ tempo - ] buttons. Press the [ tempo + ] or [ tempo - ] buttons to increase or decrease the tempo. ( tempo value in the range of 30 to 280) * Holding down either a [ tempo +] or [ tempo - ] buttons to change the setting in a high speed. * Press [ tempo + ] and [ tempo - ] buttons at the same time to reset the tempo to default value. Note: About 2 seconds after you stop pressing the [Tempo] button, display changes to show your selected song, voice or kit number instead of tempo value. tempo/tap 9 Tap tempo function This function allows you to set the song's tempo by tapping in tempo on a pad. Tap on the pad in the tempo that you want to get. The last two beats are only detected and are set as your desired speed. [. . . ] Display shows: "JXX", the rejection value is indicated. (XX=rejection level value, 00 to 15. ) 2. Press [ pad ] button or hit the pad you want to set. Press [ + ] or [ - ] buttons to adjust the sensitivity of pads. [. . . ]