User manual MEDION 5.1 SPEAKER SYSTEM MD 42491

[. . . ] 5 Front of the active Subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Rear of the active Subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SETTING UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Positioning the 5. 1 System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Only use in a suitable ambient temperature: 2 SAFETY AND SERVICE AMBIENT TEMPERATURE The 5. 1 system can be operated in an ambient temperature range between 0° C to 40° C and a relative humidity between 20% - 80% (noncondensing). When switched off the 5. 1 system can be stored between -20° C and 70° C and at a relative humidity between 20% - 90% (noncondensing). ELECTROMAGNETIC COMPLIANCE The guidelines for electromagnetic compliance (EMC) must be obeyed when operating the speakers. Keep a distance of at least three feet from sources of high frequency or magnetic interference (TV sets, other loudspeakers, mobile phones, etc. ) to avoid interference, malfunction and data loss. SERVICE Please contact Medion Help Desk should you experience technical problems with your 5. 1 system. Repair is solely reserved for our authorised service partners. Remove the power plug and contact our service organisation, if. . . liquid has penetrated to the inside of the device. the 5. 1 system does not operate properly. the device has dropped, fallen or the housing is damaged. CLEANING Clean the 5. 1 system with a damp cloth. Do not use solvents or aerosol detergents. PACKAGE CONTENTS Please check, whether the product is complete and inform us within 14 days of purchase if anything is missing. Your 5. 1 system packaging should contain the following items: subwoofer with integrated amplifier 5 satellite speakers (2 x front, 2 x rear, 1 x centre) with connection cables 3 connection cables 3, 5 mm stereo plug 2 x cinch plug 3 x Dual RCA to Dual RCA cables power adapter (model: CSA-2502200G) this manual and warranty documents SAFETY AND SERVICE 3 SPECIFICATIONS Speaker System Power adapter Active 5. 1 surround sound system CSA-2502200G Input 240V~50Hz 290mA Output 25V~ 2. 2A, 55VA In: Power connection for power adapter Cinch plugs for: · front right (red), left (white) · subwoofer (red) / centre (white) · rear right (red), left (white) Out: Cinch plugs for: · front right, left · centre · rear right, left Connections 4 SAFETY AND SERVICE CONNECTIONS AND CONTROLS FRONT OF THE ACTIVE SUBWOOFER 1 2 3 4 (design diagram) POWER LED indicator Volume control for main speakers Volume control for bass / subwoofer Switch AUX / 5. 1 Input CONNECTIONS AND CONTROLS 5 REAR OF THE ACTIVE SUBWOOFER 1 2 3 4 5 6 7 8 9 10 11 12 6 CONNECTIONS AND CONTROLS 1 2 3 4 5/6 7/8 9 10 11 12 Chinch-Connector for Stereo-AUX Input (e. g. CD-Player) Chinch-Connector for 5. 1 Input , , Front" Chinch-Connector for 5. 1 Input , , Rear" Chinch-Connector for 5. 1 Input , , Subwoofer/Centre" Speaker-Connectors for Front speakers right/left Speaker-Connectors for rear speakers right/left Speaker-Connector for Centre speaker Fuse (for authorised service personel use ONLY) Connector for power adapter ON/OFF switch CONNECTIONS AND CONTROLS 7 SETTING UP With this 5. 1 System you can reproduce surround sound effects. To reproduce these surround effects the following conditions must be met: the medium (usually DVD film) must support surround sound. Remark: Depending on the movie title surround sound effects may vary in intensity. the connected source (DVD-player, sound card, etc) must support the required connections and functions. Furthermore, your 5. 1 system must be properly connected and positioned, so that the optimal surround effect can be heard: POSITIONING THE 5. 1 SYSTEM Position the loudspeakers in such a way, that the audience is in the centre. The satellite speakers may be distributed freely. The two rear satellite speakers have longer cables, so that they can be positioned according to the space in the room: Rear right Rear left Front right Subwoofer Loudspeaker Front left Front right Rear left Rear right Centre Subwoofer Connection (see page 6) 5, Front L 6, Front R 7, Rear L 8, Rear R 9, Center (integrated) Center Description Front left For sound from the front For sound from the rear For sound in the centre This position may vary - people cannot locate the source of deep frequencies. 8 SETTING UP CONNECTING THE 5. 1 SYSTEM Note the instructions in the chapter , , Safety and Service" (pages 2 and following). CONNECTING THE LOUDSPEAKERS After having positioned the components connect the cables of the loudspeakers. Use the drawing on page 6 and the table below as a guide: Loudspeaker Front left Front right Rear left Rear right Centre Connection on the 5. 1 System (s. 6) 5, FRONT L ­ Cinch white 6, FRONT R ­ Cinch red 7, REAR L ­ Cinch white 8, REAR R ­ Cinch red 9, CENTER ­ Cinch yellow Loudspeaker plug Cinch black Cinch black Cinch black Cinch black Cinch black 2. CONNECTING THE SOUND SOURCE Your 5. 1 system can take input from a sound card, a DVD-player or another suitable sound source with the corresponding output connections. Tip: 3. 5mm stereo cinch female plugs are required. When not available, adapters are required. [. . . ] the wrong format). DO YOU REQUIRE ADDITIONAL SUPPORT? If the suggestions in the previous section did not solve your problem, please contact us. It would help us, if you could supply the following information: The configuration of your computer Are you using any other peripheral devices?Are any messages displayed on the screen?What were you doing when the malfunction occurred? [. . . ]