User manual MEDION BDA80403ML

[. . . ] Carefully insert the radio into the mounting frame. During installation please use the car radio's ISO sockets to connect the car radio. The corresponding ISO adapter plugs (car counterparts) can be bought from a dealer depending on the vehicle model. Your guarantee lapses if you disconnect the adapter socket from the cable or cut the cable! [. . . ] Move through pre-set programs Automatic search of your stations stored in the transmission range. In order to select only the alternative frequencies of the desired regional program; press the AF button (11) a little longer until a signal sounds, in order to switch the mode on or off. You can now search your stations according to the following categories: When the TA mode is switched on and the radio traffic service is being transmitted while the CD or USB is connected, it will switch automatically to radio. If EON cannot find any radio traffic service in another program, it occasionally switches to the EON relay station. If the volume level is below the threshold, it will be increased. the TA function for ongoing radio traffic service is interrupted by pressing the TA/REC button (12). if the TA/REC button (12) is pressed for a longer period , the EON TA LOCAL/EON TA DISTANCE mode will be selected. EON TA information may be assigned with this mode, for example, you are listening to a station that does not provide traffic reports but a traffic report is broadcast on another station frequency, so the unit will automatically switch over for the duration. The unit will switch back to the previous station as soon as this report is completed. EON TA local mode EON TA LO flashes for several seconds on the display when the EON TA LOCAL mode has been selected. the mode for the local area has been selected. EON DX Mode EON TA DX flashes for several seconds on the display when the EON DX mode has been selected. The mode for a more distant area has been selected. In addition to the familiar music and voice services they also send additional information in the form of encrypted digital signals and these are analysed by the car radio. When a station is received now, the station's name and other information is displayed on the screen (14). This information varies with the station. Various kinds of RDS services are on offer: PI: PS: AF: Program Identification Code The PI code is used by the radio to identify the station that is being received. Traffic Programme/Traffic Announcement Enhanced Other Network Information If you are listening to a station that does not provide traffic reports and there is a traffic report it is played by switching to another station. Program Type Code The radio can search for stations with pre-set program content, e. SCDP (meaning, search titles) appears now in the display. The unit will switch back to radio mode. Forward and reverse at high speed Press the TUNE |<< (22) or >>| button (23) longer during playback to start fast forward/reverse. [. . . ] Clean the CD or try to play another one. Let it cool off, until the ambient temperature returns to normal. Switch the player off for a few hours and then retry Set the volume at the desired level. The control unit is not Verify that the properly located. [. . . ]