User manual MEDION BLUETOOTH HEADSET MD 81436

[. . . ] · When the Headset is not in use, always keep it in its case. 2 BLUETOOTH HEADSET MD 81436 Safety instructions Travel Charger The charger is designed for indoor use ONLY. The charger must be connected to the designated power source as marked. When removing the charger from an outlet, never pull the charger cord, as it may damage the charger. Battery Information Note: For first time use, plug the adapter into the Headset and charge it at least 4 hours until the red indicator turns off. Battery care Only qualified Service Centres are authorised to remove or replace the Headset battery. [. . . ] · Initiate the Bluetooth pairing process on your mobile phone. Step 2 This operation varies depending on the maker and model of your mobile phone. Please consult the mobile phone manufacture´s handbook for more specific instructions. · When your mobile phone asks for a Passkey, enter 1234 Step 3 and confirm it. (Note: The 1234 is a default pin-code prestored in the Headset. ) When pairing is successful, the red indicator will turn off and the blue indicator will flash. If the Headset is not in "pairing mode" your mobile phone will not find the Headset. Remember to place your Headset into "pairing mode" before using your phone to detect a Bluetooth device. 10 BLUETOOTH HEADSET MD 81436 Connecting the unit to the mobile phone If no pairing is possible after a certain period of time (approximately 2 minutes), the Headset will automatically leave "pairing mode" and power off. You will need to repeat steps 1 to 3 again until "pairing" is successful. Making and Answering/Ending Calls Once the Headset is successfully paired with your phone, you can use the Headset to make and receive calls. The Headset can be used with voice dialing if your phone supports this feature. For detailed instructions on voice dialling/control, please refer to the handbook of your mobile phone. Using voice dialing Press the S1 button, wait for a beep and say the name of the person you wish to call. Using the phone keys to make a call Enter and then dial the number on the mobile phone as you normally do. Once the call has been set up, the sound will be transmitted to your Headset automatically. Redial Press and hold the S2 button for 3 seconds, to redial the last number you called. The dialled number appears on your mobile phone. Reject a call Press and hold the S2 button for 3 seconds to reject an incoming call. 11 Connecting the unit to the mobile phone Transfer a call to the mobile phone Press and hold the S1 button for 2 seconds, to transfer the call to the mobile phone while you are talking on the headset. If you want to transfer the call back to the headset, press the S1 button again. Answering Calls and Ending Call When the Headset is powered on, and there is an incoming call, you will hear a musical beep, and also the blue indicator will change to a quick-flashing mode. (When the Headset is in stand-by, the blue indicator will be in a slow-flashing mode. ) Using the headset with VoIP devices This headset can be used with any Bluetooth enabled Desktop, Laptop or PDA that's with internet connection and supports the Ausio Gateway Profile. You can use your headset then as microphone and speaker of your original VoIP system, such as Skype, MSN Messenger e. t. c. . 12 BLUETOOTH HEADSET MD 81436 Connecting the unit to the mobile phone · When the Headset rings, press the S1 button to answer. [. . . ] Some Bluetooth enabled mobile phones which do not include the correct Bluetooth implementation will occassionally freeze the Bluetooth status and will need to be restarted. If this happens, remove the battery of your mobile phone and then replace it. It is not necessary to 17 6. 7. 8. 9. Frequently Asked Questions (FAQ) 'pair' the phone and Headset again. Always make sure that your Bluetooth phone has the latest version of firmware loaded. [. . . ]