User manual MEDION BODY FAT SCALE MM 10624

[. . . ] Your feet must be placed on the metal measuring points for the scales to measure body fat and water. Do not continue using the device if it or the glass area is damaged as you could injure yourself. If the scales are not going to be used for long periods, remove the batteries. The following people should not use the body fat and water measurement: ! [. . . ] As shown by the diagram in the battery compartment, insert one of the two button batteries with the plus pole (engraved side) pointing down and the other with the minus pole (smooth side) pointing down: If the screen shows "LO" or the display's intensity falls the batteries must be replaced. There follows a list of all the messages that the screen can display: Press ON/OFF again (if you do not press ON/OFF again the weight is also displayed but the scales also try to measure the body fat and water). If you want to change the measurement from the default kg to lb first press the SET button (refer to "Other functions" on page 10). After a few seconds the screen indicates your weight in kg. If the scales do not register weight for around 10 seconds it switches itself off automatically. The scales interpret your body fat and water values on the basis of your personal data. Therefore you have to enter your personal data before measuring your body fat and water. Twelve memory spaces are provided for this. The personal data is: weight unit kg or lb, sex, height, age and the athlete mode. You enter your personal data as follows: !The most recently selected memory location is displayed (the first time the device is used: 1). Use the UP or DOWN buttons to select the desired memory space and confirm by pressing SET. The display now switches to the weight unit. Use the UP or DOWN buttons to select the weight unit (kg or lb) and confirm by pressing SET. Use the UP or DOWN buttons to select the desired age and confirm by pressing SET. IIf you enter an age under 12 the screen changes for both measurement and display from adult to child mode. 0" When you have entered your personal data, the display flashes "1- 12" three to five times and the height and sex of the most recently entered personal data are shown. But at this point you can also enter the athlete mode (see next page). At this point you can set the athlete mode and change the weight unit again. * You must enter a minimum age of at least "15" before being able to select the athlete mode. [. . . ] The following are displayed on the screen in quick succession: Weight Body fat and water measured Percentage of body fat Percentage of body water Then the scales switch themselves off automatically. At this point you can also set the athlete mode and change the weight unit (refer to "Other functions" on page 10). Body fat Your body fat ratio can vary from day to day and depending on the time of day. Body water Our bodies are primarily made up of water. [. . . ]