User manual MEDION CHICONY CORDLESS DESKTOP WUR0108T

[. . . ] 4 Multimediatasten der Tastatur. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Keyboard battery indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Cleaning the keyboard and the mouse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It will change the ID, instead of channel. 1. Plug the plug (1, black) of receiver int o an USB port of your computer. The computer will activate your mouse and keyboard after 10 seconds. Place the receiver at least 20 cm (8 inches) from other electrical devices (e. g. monitor) to achieve optimum performance. The distance between the keyboard, mouse and receiver should not exceed 5 feet. Do not place the receiver on metal surfaces. Setting ID on keyboard and mouse 1. Push the connect button on the top of receiver. The indicator on the top of receiver will be blinking. 2. Hold down the button on the bottom of keyboard and mouse until 3 seconds. The ID will be changed after the button released. Note: The Microsoft® Windows® 98 Operating System does not well support an USB keyboard/ mouse. In order to complete the setting of USB keyboard and mouse, it is advisable to use a PS/ 2 keyboard and / or mouse to follow the on screen instruction. ENGLISH 3 SOFTWARE INSTALLATION WORKING IN COMFORT WITH YOUR INPUT SET The following sections contain information on using the keyboard and the mouse. Using mouse wheel In addition to two buttons, the mouse also has a wheel that can be used as follows: · As a 3rd button: press on the wheel. in documents or on Internet pages: turn the wheel forward or back. You can specify further settings in the mouse software. Caution!During the installation of the software it is possible that some important files are overwritten or modified. To have access to the original files in case of problems that arise after installation, it is advisable to create a back-up of the hard disk contents. The software provided, only supports Windows 98SE, Windows ME, Windows 2000 and Windows XP. Install the software to use all mouse functions. 1. Start the computer and insert the data carrier in t he corresponding drive. 2. Start the Setup program from the data carrier and follow the instructions on the screen. Standby Mode MULTIMEDIATASTEN DER TASTATUR The keyboard has several additional function keys. Depending on the settings in the BIOS Setup or operating system the computer switches to a standby mode. [. . . ] · Make the connection between the receiver and the keyboard and mouse. Press a mouse button and then the connection button on the receiver. · Make sure the batteries are not too weak. · Remove the batteries from the device. [. . . ]