User manual MEDION DIGITAL TERRETRIAL TV RECEIVER MD 29292

[. . . ] To prevent danger of fire and electrical shock please avoid damp surroundings and under no circumstances should the device come into contact with rain or water. Do not place any vessels containing fluids on the device (e. To avoid an electrical shock the cover must not be removed. Please let service and repair work only be carried out by a specialist. [. . . ] Note: If you have selected a channel for the first time it may occur that the data in the list is actualised as you navigate. Daily overview Detailed view To get detailed information to a program in this list press OK. The next or previous programs are reached with / buttons. Digital television is a relatively new medium. The implementation of the new technology is very complicated for the broadcasters and not at the same level of advancement everywhere. Therefore, please have under-standing that the EPG may not be so detailed with some channels and could have failures. your receiver has a mechanism for the correction of certain recognised failures in the transmission of EPG data. Although we are also capable of making mistakes experience shows that EPG failures are most probably the cause of disregard to the DVB standard by the broadcasters. If you have a failure in the EPG of a digital program of your interest, please contact the broadcaster and convince them to continue with further improvements. Further information to this theme and known failures can be found in the Internet under www. If you have selected a channel that offers teletext data the programme menu contains an entry "Teletext" that can be used to open the OSD Teletext. Depending on your remote control model you can use this function directly with the TEXT key. 0­9 P+ / P­ +/­ Enter page number (between 100 and 899) Single step through the pages Pages that are not in the page cache will be skipped. In normal mode: Volume control In sub page mode: Single-step through sub pages MUTE OK MENU INFO/EPG SWAP Mute on / off Activate/Deactivate sub page mode. While the sub page mode is active a green ">" is displayed in the second text row. Go to page 100 Quiz key (uncover hidden text) Step through zoom modes: 4. Only as far as supported by your remote control model: TEXT Out of the running programme: Open Teletext Out of the teletext window: toggle between transparent and nontransparent mode PAUSE/ GREEN Teletext stop (page will not be updated) -- press again to restart teletext retrieval Only for models with Common Interface: At the rear of the receiver two slots are found in which modules can be inserted for decoding scrambled channels. To avoid damage to the receiver only cards carrying the "PC Card"-Logo should be used. Other cards could cause irreparable damage to your equipment. Do not apply force when inserting the modules. Instead remove the module completely and insert it again. please check that the module is not inserted upside-down. [. . . ] To change between the lists use the SWAP button. There are certain options on offer, to make use of these options choose a channel which you wish to change from one of the lists and press OK, then choose an option from the menu which appears. In operations where channel entries are to be added to the channel list, the selection is changed to the left hand window and you are then required to select the target position with the OK button. Note: If the channel list is empty before the scan is performed the results will automatically be copied into the left list. [. . . ]