User manual MEDION DVD PORTY MD 80652

[. . . ] Please read these instructions carefully before using the system. note the warnings in the operating instructions. Always keep the operating instructions close to hand. If you sell the device or give it away, make sure you also hand over these instructions and the guarantee slip. [. . . ] Connect the mains adapter to an easily accessible 230V ~ 50Hz power socket. If necessary switch the DVD player off before connecting the mains adapter. You can output both images and sound to other devices. In contrast you can also replay images and sounds from other devices on the portable DVD player. Before making connections switch off the power supply to the DVD player and all other devices!You can switch the VIDEO IN/OUT and AUDIO IN/OUT sockets on the side of the device from the default OUT setting (output of AV signals to other devices) to IN. For example, this setting enables you to use the DVD player as a TFT monitor. Switch the AV switch to IN if you want to use the TFT monitor to play pictures and sound from an external device. â· Switch the AV switch to OUT if you want to play pictures and sound over the player's AUDIO/VIDEO socket. Avoid inputting AV signals via the AV sockets if the DVD player is set to AV OUT: This produces interference during ongoing playback. You can connect the DVD player via the coaxial output to a Dolby Digital/DTS/ MPEG-2 decoder or an amplifier with integrated decoder. 1 channel sound you need five loudspeakers and a subwoofer. You can use the DVD player in a car by using the car adapter supplied. â· Connect the car adapter at one end with the DC IN socket on the main device and at the other with the car's cigarette lighter. You can fix the car bag together with the DVD player as follows to the car seat headrest: Make sure that the device has power (see above). â· To turn on the device switch the POWER ON/OFF switch on the main device to the ON position The operating LEDs on the device will light up. Place a disc into the disc compartment with the printed side (in the case of single-sided discs) facing upwards and close the disc compartment cover. If no film (DVD) is being played and there is no input for more than 2 minutes, the TFT monitor will switch off to save batteries. There follows a description of the device's functions when using the remote control buttons. Please note, however, that this function is not available on many DVDs. SUBTITLE: Press SUBTITLE repeatedly to select another subtitle language stored on the DVD. Please note, however, that this function is not available on many DVDs. [. . . ] dVD: Does the DVD have the correct regional code (2)?If condensation has formed in the device: give the player one to two hours to dry off. Check whether the batteries need changing and have been inserted correctly. Remove anything which may be blocking the signal between the infrared transmitter, the remote control and the device's sensor. [. . . ]