User manual MEDION LCD DISPLAY MD 30007

[. . . ] COLOR MONITOR 17 INCH LCD © 2005 All rights reserved. Trademarks: MS-DOS® and Windows® are registered trademarks of Microsoft®. Pentium® is a registered trademark of Intel®. Other trademarks are the property of their respective owners. [. . . ] Regardless of the possible professional utilization, this display is intended for private use only. QUALITY We focused on great features, ease of use and reliability in manufacturing your LCD monitor. The balanced hardware and software concept offers you an advanced display design which will provide you a great deal of pleasure for your work and entertainment. SERVICE Service and support will be available every time you use your new LCD Display. This manual contains a separate chapter on the subject of service beginning on page 13. INCLUDED EQUIPMENT Please check your new LCD Display for completeness. Notify us within 14 days after purchase if it is not complete. With your LCD monitor you receive: 1 - LCD screen with installed data and audio cable 1- Connection cable 1 -Stand 1 - Brief Instructions 1- Guarantee card 1 - CD with operating instructions and drives PERFORMANCE CHARACTERISTICS Advantages in relation to cathode ray tubes Less space required Lower weight Power savings High image quality SXGA standard: resolution up to 1280 x 1024 @ 75 Hz Full image for all resolutions Over 16 million colors (simulated) High contrast ratio Further features The LCD monitor is a plug and play device which is automatically recognized by your operating system. The power management fulfills the VESA DPMS standard. During idle times (OFF mode) the power consumption is automatically reduced by up to 95 %. Extended connection possibilities Integrated amplifier with loudspeakers (optional) INTRODUCTION 5 START-UP Before start-up always read the Chapter "Safety and Precautions" on page 1ff. PREPARATIONS ON YOUR COMPUTER If you have operated your computer previously with a CRT monitor, it will be necessary for you to make a few preparations. This is required when your previous monitor was operated with settings which are not supported by your new LCD monitor. SUPPORTED MONITOR SETTINGS Resolution 720 x 400 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 1024* 1280 x 1024 *recommended physical resolution Horizontal Frequency 31. 47 KHz 31. 47 KHz 37. 86 KHz 37. 5 KHz 37. 88 KHz 48. 08 KHz 46. 87 KHz 48. 36 KHz 56. 48 KHz 60. 02 KHz 63. 98 KHz 80. 00 KHz Vertical Frequency 70 Hz 60 Hz 72. 8 Hz 75 Hz 60. 3 Hz 72. 2 Hz 75 Hz 60 Hz 70. 1 Hz 75 Hz 60. 02 Hz 75 Hz DISPLAY PROPERTIES This Windows program offers you the possibility of adapting the display to your monitor. This includes items such as the background image, the screen saver, the Active Desktop (Web) as well as other settings for your monitor and video card. The program can be started as follows: Right mouse click on Windows desk top and left mouse click on "Properties". Or Start the "Display" program in "System control". 6 ENGLISH Then click "Color quality" to set the color depth (number of colors displayed). Your monitor supports a maximum color depth of 16 million colors corresponding to 32 bit or "True Color". The resolution can be set under "Screen resolution". Your monitor can display a maximum of 1280 x 1024 image dots. The image repeat frequency can be set under "Advanced". A window with the characteristics of your video card appears depending on the configuration of your computer. Under "Adapter" you can change the desired value in the selection field "List All Modes. . . ". Caution!If your setting does not coincide with the values supported by your display, you may not see any image. The value for the LCD should be 60 Hz and, depending on the setting, not exceed 75 Hz. Switch your old device on again and set the applicable values under `Display Characteristics' in accordance with the aforementioned options in this case. START-UP 7 FIXING THE MONITOR BASE Mount the monitor stand as shown in the diagram. Perform this step before connecting the monitor. (Similar picture) CONNECTING THE MONITOR To start using the LCD monitor straight away, please read the "Safety and Precautions" section (page 1). [. . . ] There have been several attempts in the past to define the acceptable number of defective pixels. But this can be difficult and varies widely between different manufacturers. MEDION, therefore, adheres to the clear and strict requirements of ISO 134062, class II, for the warranty handling of all TFT display products. These requirements are summarized below. [. . . ]