User manual MEDION LCD TV MD 30325

[. . . ] The service address on the back of these Instructions for Use) if problems with your LCD TV arise. Furthermore, you will find useful information regarding troubleshooting on page 21 of this manual. Purpose of use ⷠThis device serves to receive and transmit television channels. The different connection possibilities (receiver, DVD player, DVD recorder and VCR, etc. [. . . ] Camcorder), the sound of which you want to transmit through the LCD TV, here. DVD player, video recorder, SAT or DVB-T receiver, games consoles, etc. You will need a SCART cable (not in the scope of the delivery) for this connection. The connections are on the side in the case of the 20" LCD TV and at the bottom of the back in the case of the 19" and 22" LCD TVs. Alternatively, you can connect the LCD-TV and the video recorder with a SCART cable. This is advisable for a high picture and sound quality. Apart from this, connect the aerial cable as described in the `Video recorder' section (see above). If your computer has a SCART, or Video output, you will be able to transmit the computer display by means of one of these connections. Note Only choose one possibility, in order to avoid problems with the signal allocation, even if your computer offers several connection possibilities. You will shift between the TV, AV, SVIDEO, SCART and PC sources of reception with the directional keys. Call up the Menu; back to the previous Menu 9. Select the colour corresponding to corresponding to your country with the 6. Note You will be able to change the sequence of the channel positions according to your requirements. Read how you can sort the channels under the CHANNEL SWAP Menu point in the in the `CHANNEL Menu' section from Page 18. The channel search will be made by means of the respectively connected device, in the case of devices connected through SCART or Composite. Press either one of the CH+ / CH- buttons on the device or one of the CHANNEL buttons [11] on the remote, or select the channel directly by means of a number key, in order to select a channel. You will select the channel broadcast most recently with the button [9]. You will increase or reduce the volume with the VOLUME buttons [18] on the remote or V+/V- on the device. Press the button [5] to switch the sound off or on again completely. You will choose between MONO and STEREO output with the NICAM button [4]; DUAL A and DUAL B. DUAL A and DUAL B will only be able to appear if the current broadcast supports the DUAL Mode (e. You will select the sound mode with the [21] button: NEWS, MOVIE, USER, NORMAL. [. . . ] Place the unit as far apart as possible from device that may cause possible interference. If the suggestions in the above section have not solved your problem, please contact the hotline. We will try and help you over the telephone. However, before you contact your Service Center, please keep the following information available: · If you have already been given a customer number, please keep this available. [. . . ]