User manual MEDION LCD TV MD 41427

[. . . ] Flat Panel LCD - TV © 2004 All rights reserved. Trademarks: MS-DOS® and Windows® are registered trademarks of Microsoft®. Pentium® is a registered trademark of Intel®. Other trademarks are the property of their respective owners. [. . . ] Now the screen will display the PROGRAM EDIT or AV EDIT Menu: Programm edit Frequency input Tuning Channel grid Channel type Channel number Change name TV-standard Color standard Audio channel Adjustment Decoder 1. 3. AV edit Change name Color standard Adjustment 4. Frequency entry: Here, you can change the reception frequency or enter it directly. Position the Selection Bar at FREQUENCY ENTRY with the P+/P- Buttons. Now, you will be able to change the reception frequency with the VOL+/VOL- Buttons. At the same time, attention should be paid that that the display bar of the 2nd TUNING Menu Point is positioned in the center, because the station is set optimally then. You can also enter the reception frequency directly with the number Buttons by pressing the MENU Button. You will leave direct sound entry again with the MENU Button. Channel grid: The channel grid can be changed with the MENU Button (Menu) or the VOL+/VOLButtons. The channel grid represents the setting of the channels to the frequencies available and can vary according to the location (e. CCIR in Germany differs from the setting necessary in France). Channel type: The channel type can be changed with the MENU Button (Menu) or the VOL+/VOLButtons. It is possible to select between channels and special channels or special channels in individual states (e. g. C1 in France), depending on the setting of the channel grid. Channel number: You can enter the channel number of the channel slot that you require directly here. You can increase or decrease the current sound channel number with the VOL+/VOL- Buttons. A cursor will appear and you will be able to enter the channel number directly with the number Buttons when you press the MENU Button. TV Standard: The TV standard can be changed with the MENU Button (menu) or the VOL+/VOLButtons. Settings related to the transmission norm (location-dependant) of a station can be made here. 20 ENGLISH Decoder Setting Off External/Internal Sound External Sound Internal Sound Station/Sound Decrypted Analog Nicam Analog Nicam Analog Nicam Encrypted Decrypted Encrypted Encrypted Decrypted Decrypted Station/Picture Decrypted Encrypted Sound Output Source TV Analog Decoder NICAM TV Analog Decoder NICAM Decoder Analog TV Nicam TV Picture Presentation of TV Decoder Português Encrypted Decoder 13. Press the EXIT Button and confirm that you want to store the changes carried out with YES. Note: The settings described above are only necessary in exceptional cases (manual setting of a new station, connection of a decoder, etc. ). The automatic APSAS station search carries out most of the settings independently. 8. [. . . ] There have been several attempts in the past to define the acceptable number of defective pixels. But this can be difficult and varies widely between different manufacturers. MEDION, therefore, adheres to the clear and strict requirements of ISO 13406-2, class II, for the warranty handling of all TFT display products. These requirements are summarized below. [. . . ]