User manual MEDION MD 30132 CODE LIST

[. . . ] Flat Panel LCD - TV © 2005 All rights reserved. Trademarks: Manufactured under license by Dolby Laboratories. `Dolby', `Pro Logic' and the Double D symbol are trademarks of Dolby Laboratories. The "HD ready" Logo is a trademark of EICTA. [. . . ] AV edit Change name Colour standard Adjustment Italiano Français 4. Go to the CHANGE NAME Menu Point with the assistance of the P+/P- Buttons and press the MENU Button. Now, you can select the letters required with the P+/P- Buttons. You will reach the next position with the VOL+/VOL- Buttons (each channel name can be 8 symbols long). You will leave the name selection with the MENU or EXIT Button. Press the EXIT Button and confirm that you would like to store the changes that you have carried out with YES. 8. TV MODE ADJUSTMENT 19 Dansk Português Nederlands Español Deutsch Move the channel to the channel slot that you require with the assistance of the P+/P/Vol+/Vol- Buttons. SETTING CHANNELS MANUALLY 1. Go to the channel slot in the program table that you would like to edit with the assistance of the P+/P-/Vol+/Vol- Buttons. Either press the YELLOW Button to call up the processing function directly or call up an Edit Functions Menu with the MENU function and select EDIT. Now the screen will display the PROGRAM EDIT or AV EDIT Menu: Program edit 1. AV edit Change name Colour standard Adjustment 4. Frequency entry: Here, you can change the reception frequency or enter it directly. Position the Selection Bar at FREQUENCY ENTRY with the P+/P- Buttons. Now, you will be able to change the reception frequency with the VOL+/VOL- Buttons. At the same time, attention should be paid that that the display bar of the 2nd TUNING Menu Point is positioned in the center, because the station is set optimally then. You can also enter the reception frequency directly with the number Buttons by pressing the MENU Button. You will leave direct sound entry again with the MENU Button. Channel grid: The channel grid can be changed with the MENU Button (Menu) or the VOL+/VOLButtons. The channel grid represents the setting of the channels to the frequencies available and can vary according to the location (e. CCIR in Germany differs from the setting necessary in France). Channel type: The channel type can be changed with the MENU Button (Menu) or the VOL+/VOLButtons. It is possible to select between channels and special channels or special channels in individual states (e. g. [. . . ] Some countries, states or provinces do not allow exclusions or limitations on the duration of an implied warranty, so the above limitation or exclusion might not apply to you. This limited warranty gives you specific legal rights and you might also have other rights that vary from country to country, state to state, or province to province. Our limited warranty is valid in any country or locality where we have a support presence for this product and where we have marketed this product. The level of warranty service you receive may vary according to local standards. [. . . ]