User manual MEDION MD 82339 CODE LIST

[. . . ] Keep electrical equipment out of the reach of children . : Press and hold for a few seconds to turn device off (the device can be turned on with any button except MODE: Press repeatedly to select operation mode. : When pressing this button, the control panel slides out electronically and the disc slot becomes visible. : Release control panel ) and decrease ( ) volume AS/PS: Press and hold for 2 more seconds: the radio will search for six stations and store them into the preset memory 1-6 : Opening the settings menu of the car radio 5. [. . . ] This is set automatically by the RDS station and keeps running even when the radio is switched off. You can also use the menu to manually set the clock (see below). You can switch on the radio with any button except and . In one of the three band ranges FM1, FM2 or FM3, then press the key or to find stations in the VHF band ranges that are broadcasting an AF signal. The search will stop each time a station is found. The AF mode is switched on in the delivered condition, or after a reset. After the search function has found a station, press and hold one of the 16 station buttons for about two seconds. The radio will switch back into automatic search mode after a few seconds. The found stations are automatically stored on the station buttons 1-6. The scan stops for five seconds each time a station is found. You can call up the stored stations for the current transmission areas. When you hear the station you require, briefly press AS/PS. In addition to traditional music and voice services, they also broadcast additional information in the form of encrypted digital signals that can be displayed by the car radio. This information - like the station name or the title of the track currently being played - is shown in the display. If the station does not broadcast RDS signals, the frequency will appear instead of the station name. In RDS mode, once you leave the range of one transmitting station, you will be automatically switched to another frequency. The change is only successful if the PI codes are identical (the PI code is the Programme Identification which clearly identifies the programmes and transmitting chains). This avoids switching to a frequency that is occupied by a different programme. In the regional programme mode, the radio cannot switch to a frequency that is being broadcast by another regional programme. To switch the regional programme mode on or off, hold down the AF button for more than two seconds. If the station transmits RDS signals and provides traffic announcement, the activated TA function will immediately switch from other operating modes (e. CD) to the radio when traffic announcements are being broadcast. [. . . ] OSD LANGUAGE:The language of the DVD menu and other screen information. RF REMOD: Sound is played back without changes to the volume. DYNAMIC RANGE: Here you can set the dynamics of the sound (see OP MODE) in single steps. OFF: Sound is played back without changes to the volume. [. . . ]