User manual MEDION MD 85905 CODE LIST

[. . . ] All information presented is as accurate as possible but is subject to change without notice. Copyright This manual contains proprietary information protected by copyright. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. © Copyright 2009 Intended Use This device is intended to record photos in a digital format. It is only designed for private use and not intended for a commercial application. [. . . ] This function is only available in recording still images. The Drive mode setting is automatically set to off when you turn off the camera. The table below shows the available Drive mode settings. Icon Off 10 Sec Self-timer 2 Sec Self-timer Item Description Captures an image without time delay. Sets a 10-second delay to capture image after pressing the shutter button. Sets a 2-second delay to capture image after pressing the shutter button. Performs delay and capture twice: · Performs a 10-second delay, then captures the image. · Performs another 2-second delay then captures the image again. Performs continuous shooting when the shutter button is pressed. Stops shooting when the shutter button is released. Automatic Exposure Bracketing (AEB) captures the same image with three different exposure settings: standard, under, and over exposure. 10 2 x2 Double Self-timer Burst AEB 34 Chapter 4: Recording Photos, Videos and Voices AF Lamp The AF Lamp function allows you to record images even in low light conditions. If AF Lamp is set to Auto, the AF lamp located in the front of the camera, see "Front View" on page 3, emits a red light by half pressing the shutter button allowing the camera to focus easily. Available settings are: [Auto] and [Off]. AF Lamp Auto Off 1/1 Recording Movies 1. To select Camcorder mode, tap Scene Mode menu. Focus your camera on the subject that you want to take. Press the Shutter button to start recording. Use the control to zoom in and zoom 00:10:00 out an image. To stop recording, press the Shutter button. Note · Sound cannot be recorded while pressing the control. · Digital zoom is not available in movie recording. · The camera will automatically stop recording when the memory capacity is full. Setting Camera to Record Movies Use the Quick-Set Bar to change camera video settings. The Quick-Set Bar contains shortcuts to the following menu items: Quality, Movie Size, Frame Rate, Stabilizer, White Balance, Effect, and Main Menu. Tap an icon to open the submenu. 640 AF AWB N Use the Camcorder Menu to change other settings like: Sharpness, Saturation, Contrast, Focus Mode and AF Lamp. [. . . ] Folder names begin with a 3-digit number from 100 to 999 and followed by "DICAM" or "_AUCT" or "_UTUBE". If new files are saved, a new folder named in sequence will be automatically created. File Naming File names begin with "DSCI" and followed by a 4-digit number that increases in sequence. File numbering starts from 0001 when a new folder is created. If the highest folder number is 999 and the highest file number exceeds 9999, the camera will display the warning message "Folder cannot be created. " When this happens, try one of the following ways: · Reset the file number. [. . . ]