User manual MEDION MD 98030 QUICK GUIDE

[. . . ] Notes on these Operating Instructions The operating instructions and installation guidelines have been organized so that subjectrelated information can be easily found using the contents list. Note You will find comprehensive Operating Instructions for navigation on DVD and at the online help of the device. The section "Frequently Asked Questions" contains answers to questions that are frequently addressed to our customer service department. Document Your Navigation Unit It is important to record the details of your Navigation Unit and the purchase thereof. In the event you require warranty support you may be asked for this information. [. . . ] Press it gently backwards () until it engages audibly (). Stylus in holder 4. Place the holder on the fixing catches of the car holder. Now, push the unit to the side until it engages audibly. Now you will be able to place the complete unit on the cleaned windscreen. - 26 UK/ N. IRELAND HELPLINE 1-800-992508 (calls are charged at 7p per min from a standard landline, calls from mobiles could be higher) III. Connecting the Car Adapter 1. Plug the jack () of the connection cable into the corresponding receptor at the bottom of your navigation system (see Page 9). Insert the power adapter () into the cigarette lighter socket and ensure, that it will not lose contact while driving. Note Remove the power adapter from the cigarette lighter socket when ending a trip or when parking the car for a extended period of time. Otherwise the car battery could be drained. In this case use the power switch to turn off the navigation system. - 27 UK/ N. IRELAND HELPLINE 1-800-992508 (calls are charged at 7p per min from a standard landline, calls from mobiles could be higher) IV. Starting the Navigation Software Note Your memory card will always have to be inserted into the device during the use of the navigation system, if the card contains (additional) mapping material. It will be necessary to carry out a reset to restart the navigation system if the memory card has been removed while the system was being used (see page 21). According to the navigation system the reset is carried out automatically. The Navigation software will start automatically or after tapping on the navigation control button on the main screen, according to the version. Tap on Navigation on the screen for entering the destination. Confirm your entry by tapping the symbol to start the navigation. After a short time, if the satellite reception is adequate you will receive augmented language statements. Further information regarding the navigation software can be found on the comprehensive manual on your DVD. This is a PDF-file you can read and print with any Acrobat Reader. Note The GPS-receiver will require some minutes for initialization when deployed for the first time. [. . . ] 4 Care of the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Service Faults and possible causes . . . . . . . . . . . . . . [. . . ]