User manual MEDION MP3 BOOMBOX MD 81651

[. . . ] CD compartment Telescopic antenna 3D SURROUND ON / OFF ­ Switch the surround sound on / off PRESET/FOLDER + button PRESET/FOLDER - button CD modus: REPEAT ­ Repeat function Radio modus: MONO-ST. FWD: Cassette button Forward REW: Cassette button Backward PLAY: Cassette button Play RECORD: Cassette button Record PLAY/PAUSE: Playback/ Interrupt Playback LCD Display LED STANDBY STOP: Stop playback Right loudspeaker Left loudspeaker TIMER/SLEEP ­ Activate Timer / automatic Sleep function TIMER SET/TIME DISPLAY ­ Setting for Timer SKIP/TUNING ­ Radio programme search / select CD title SKIP/TUNING ­ Radio programme search / select CD title ID3 ­ Information display in the case of MP3 files MEMORY/CLK-ADJ. 3 Electrical devices do not belong in the hands of children . Please observe the following safety instructions carefully before putting the unit into operation. [. . . ] REMARK The time display will flash when the power connection has been recreated after a power failure or interruption. On the back of the device you will find the headphone socket (PHONES). High volumes when using earphones or headphones can lead to a loss of hearing. set the volume to the minimum before putting on earphones or headphones!Your hearing can be damaged if it is subjected to high volumes too suddenly or for too long!REMARK The volume level has a setting range from 0 to 40. Press the EQ/BBS Button for 2 seconds, in order to switch the bass amplification on. Press the EQ/BBS Button for 2 seconds again, in order to switch the bass amplification off. You will set them as follows in the playback mode: 1. Press 3D SURROUND out to turn off the 3D Surround function. Press MUTE, in order to switch the sound playback to mute. Press MUTE again, order to switch the sound playback on. You have the possibility of setting different sources of playback with your device. You can listen to the radio, CDs or cassettes and play MP3 files from a USB stick. You will be able to set the programme manually with a single button press. The progress of the search will stop automatically at the next programme (Autoscan) if you hold the button pressed for longer than a second. Up to twenty programmes can be stored for each frequency range. Press the PRESET/FOLDER + or - Buttons, in order to search for the required memory position. Button, in order to confirm your selection. REMARK Press the buttons PRESET/FOLDER + or ­ until Memory and 00 are blinking. it will be necessary to press the MEMORY/CLK-ADJ. Button again if the displays are no longer flashing. [. . . ] You can programme the order in which up to 60 tracks are played he unit must be in stop mode (if necessary press PLAY and STOP). Select the track that you want to store at the first programme position with the SKIP/TUNING Buttons. Buttons, in order to store the required track in the list. Repeat these steps, in order to store additional tracks. [. . . ]