User manual MEDION P470 QUICK GUIDE

[. . . ] Contents Safety and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Data Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] i Note: To obtain a strong and secure hold the suction plate should not be used for 24 hours. Note: It cannot be excluded completely that certain plastics, strong solar radiation, etc. will affect or soften the adhesive strips and will be able to damage the surface of the dashboard through this. We shall not accept any liability for damage to the dashboard that may occur. Connect the suction plate to the holder. Pay attention to the lettering on the holder. The connection must engage audibly (Illustration, see the following page). i II. Fixing the suction plate i Note: Clean the disk thoroughly with a glass cleaner. Warm the disk and the nipple slightly at temperatures below 15° C. Place the holder with the suction head onto the suction plate (or directly onto the wind screen) and press the lever on the suction head downwards. The sucker will attach itself to the background firmly. 28 English III. Connect the car adapter (see page 17) and, if necessary, the external GPS aerial, to your navigation system and insert the memory card. Place the device below in the centre of the holder and press it gently downwards until it engages audibly. Now you will be able to place the complete unit on the cleaned windscreen or the suction plate. cradle (similar picture) Navigation 29 IV. Connecting the car adapter (similar picture) 1. Plug the jack ( ) of the connection cable into the corresponding receptor at the bottom of your navigation system (p. Insert the power adapter ( ) now into the cigarette lighter socket and ensure, that it will not lose contact while driving. i Note: Remove the power adapter from the cigarette lighter socket when ending a trip or when parking the car for a extended period of time. Otherwise the car battery could be drained. 30 English V. Starting the navigation software i Note: The memory card must always be inserted in the device while the navigation system is being used. It will be necessary to carry out a Soft Reset to restart the navigation system if the memory card has been removed, only for a short time, while the system was being used (see page 24). This Reset will take place automatically, according to the navigation system. 1. The Navigation software will start automatically or after tapping on the navigation control button on the main screen, according to the version. [. . . ] 13 M Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Microsoft® ActiveSync® . . . . . . . . . 14 Mounting on (Bicycle) Handlebars . . . . . . . . . . . . . . . . . . . . . . 27 MP3 Player . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]