User manual MEDION PNA 250T

[. . . ] Contents: Safety and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Data Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Operating Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Repair. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Attention: Important files can be overwritten or changed during the installation of software. You should create a hard disk backup, in order to be able to have access to the original files in the case of possible problems following the installation. You must have administrator rights to install the software under Windows® 2000 or XP. Attention: You should not connect the navigation system to your computer yet. 1. Insert the Support CD and wait until the program starts automatically. i Note: The Auto Run function is probably deactivated if it does not function. The Setup program on the CD must be started, to start installation manually. 2. Choose the language, click then Install ActiveSync® and follow the instructions on the screen. 24 ENGLISH II. Press the On/Off button to start your navigation system. Connect the USB cable to your navigation system. Push the USB connector into a free USB port on your computer. The hardware installation assistant recognizes now a new appliance and installs a suitable driver which can take some minutes. Repeat the die connection search if it fails the first time. The program will now set up a partnership between your PC and the device. III. Working with Microsoft® ActiveSync® ActiveSync® will be started automatically if you connect your navigation system to the PC. The program will check whether the device is one with which a partnership has been entered. If this is the case, the changes that have taken place on the PC and on the navigation system since the last synchronisation will be compared and adjusted to each other. You will be able to define exactly which data will have priority during the synchronisation in the settings of the ActiveSync® Program. Call up the Help of the Program (with the F1 Button), in order to become familiar with the effects of the respective settings. A restricted Guest Access, with which you will be able to exchange data, for example, will become active automatically if the navigation system has not been recognised as a partner. If this is the case, although the process concerns the registered partner device, separate your navigation system from the PC and switch it off and on again. Now connect your navigation system to the PC, to restart the recognition process. Repeat the process and, restart your PC in addition, if your device continues to be recognised as a guest. [. . . ] 17 Installing the navigation software . . . . . . . . . . . . . . . . . . . . . . . 20 Switching on the navigation system . . . . . . . . . . 19 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 12 M Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]