User manual MEDION PORTABLE DVD PLAYER MD 80686

[. . . ] Please read these instructions carefully before using the system. Note the warnings in the operating instructions Always keep the operating instructions close to hand. If you sell the device or give it away, make sure you also hand over these instructions and the guarantee slip. Keep electrical equipment out of reach of children Never allow children to use electrical devices unattended. [. . . ] ⷠIn order to discover the charging status of the battery, press the OSD button on the remote control (for this to work the mains adapter must not be plugged in). Connect the mains adapter to an easily accessible 230V ~ 50Hz power socket; Use only the mains adapter supplied. If necessary switch the DVD player off before connecting the mains adapter. You can output both images and sound to other devices. In contrast you can also output images and sounds from other devices on the portable DVD player. Before making connections switch off the power supply to the DVD player and all other devices!You can convert the VIDEO IN/OUT and AUDIO IN/OUT sockets on the side of the device from the default OUT setting (output of AV signals to other devices) to IN. For example, this setting enables you to use the DVD player as a TFT monitor. Hold down the MODE button on the main device for around 1. 5 seconds until the first MODE setting appears. ⷠPress MODE repeatedly in quick succession until the message is displayed. Use the ­ and + on the main device to make the setting: = AUDIO OUT (the signals are output); = AUDIO IN (the signals are input). Avoid inputting AV signals via the AV sockets if the DVD player is set to AV OUT: This produces interference during ongoing playback. You can connect the DVD player via the digital output to a Dolby Digital/DTS/MPEG2 decoder or an amplifier with integrated decoder. 1 channel sound you need five loudspeakers and a subwoofer. You can use the DVD player in a car by using the car adapter supplied. ⷠConnect the car adapter at one end with the DC IN socket on the main device and at the other with the car's cigarette lighter. You can fix the car bag together with the DVD player as follows to the car seat headrest: Make sure that the device has power (see above). ⷠTo switch on the device hold down the ON button on the main device for around 1. You can also switch on the device from standby mode (the device LED will light up red) using the standby button on the remote control. ⷠInsert the disc with the written side to the front into the disc slot (for discs written on one side). ⷠAs soon as you have inserted the disc far enough the drive will pull in the disc automatically. [. . . ] dVD: Does the DVD have the correct regional code (2)?If condensation has formed: give the player one to two hours to dry off. Check whether the batteries need changing and have been inserted correctly. Remove anything which may be blocking the signal between the infrared transmitter, the remote control and the device's sensor. [. . . ]