User manual MEDION SCANNER MD 90093

[. . . ] 1 Scanner What your 1 year warranty means Great care has gone into the manufacture of this product and it should therefore provide you with years of good service when used properly. In the event of product failure within its intended use over the course of the first year after the date of purchase, we will rectify the problem as quickly as possible once it has been brought to our attention. In the unlikely event of such an occurrence, or if you require any information about the product please contact us via our after sales support services, details of which can be found in this manual and on the product itself. Copyright © 2007 All rights reserved. Trademarks: MS-DOS® and Windows® are registered trademarks of Microsoft®. [. . . ] The serial password for the installation is HRHBEPEPYZGHEFJ and is also to be found on the CD. Restart your computer after the installation, in order to complete the process. After Sales Support TEL: 1 300 884 987 WEB Support: www. medion. com. au 14 2. Turn the scanner, switched off, on to its side and look for the safety switch on the bottom of it: Unlocked Locked 2. Push the safety switch to the position illustrated above, so the symbol is positioned at unlocked. Turn the scanner back carefully. Locking the scanner Proceed as follows if you have to transport the scanner. Switch the scanner off, pull the mains plug from the socket and remove all connection cables and those supplying electricity. Remove the slide attachment before you secure the scanner, if it is installed. Inform yourself from the appropriate installation instructions. Lift the scanner as described above to relock it. Push the safety switch, which will now be visible, so the symbol displays locked. Transport the scanner in the original packaging if possible. After Sales Support TEL: 1 300 884 987 WEB Support: www. medion. com. au 15 3. Observe the notes in chapter Safety and service (page 4). Position the computer and scanner so that you can work with them easily and safely. Connect the supplied power adapter to your scanner as shown in the diagram above. Connect the power adapter to a power socket in close proximity of your flat bed scanner. After Sales Support TEL: 1 300 884 987 WEB Support: www. medion. com. au 16 4. Connecting to the PC Make sure your scanner software has been installed already (see page 12). Connect your flat bed scanner as follows: 1. Switch on the computer and all connected peripheral equipment (monitor, printer, external hard drive, etc. ) and wait until the operating system has booted completely. Connect one end of the USB cable to a free USB connection socket on your computer and the other end to the scanner. Switch the device on by means of the On/Off Switch. The LED will indicate readiness for operation. The scanner will be recognized and the installation process will be concluded by the operating system. [. . . ] · The file was stored in an uncompressed format (e. g. : BMP). File formats such as JPG can store images without noticeable loss of details and require only a fraction of the original storage space. Optical character recognition does not function properly or not at all. · Is the original document of good enough quality? [. . . ]