User manual MEDION TELEPHONE WITH ANSWERING MACHINE MD 40920

[. . . ] Tel+AM_MD40920_UK. fm Seite 2 Mittwoch, 7. April 2004 9:52 09 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 LINE: Socket for telephone cable DC 9 Volt: Socket for AC adaptor HI-LO: Volume for ringing sound Volume Control: Volume for messages on answering machine RING and count backward CODE and count forward Display for answering machine ON/OFF: Switch answering machine on and off MEMO: Record and play memos OGM1: Out-going message type 1 OGM2: Out-going message type 2 2 WAY: Record the current conversation On: OGM's and ICM's are heard / OFF: Mute OGM's and ICM's SPEAK: STOP/TIMER /II Play and pause DEL: Delete MEM: Press for indirect memory (before pressing numeric key) STORE: Store PAUSE: Pause FLASH: Call waiting function (depending on telephone provider) REDIAL: Repeat last entered telephone number H/F: "Hands free" key Number keys Loudspeaker M1, M2, M3: Direct memory 2 Tel+AM_MD40920_UK. fm Seite 3 Mittwoch, 7. April 2004 9:52 09 TABLE OF CONTENTS Safety Instructions . 8 Setting the unit to answering mode ANSWER/RECORD MODE . [. . . ] We are not able to come to the phone right now. If you'll leave your name, phone number and a brief message after the beep, we will call you back. ") When finished recording, release the OGM1 button. A short beep will sound and the newly recorded outgoing message will then play once. Make sure the VOLUME control is at a desirable level. 8 Tel+AM_MD40920_UK. fm Seite 9 Mittwoch, 7. April 2004 9:52 09 OPERATION OF ANSWERING MACHINE To record a new outgoing message, please repeat these steps. Recording OGM2 To record this message, proceed as described in the passage , , Recording OGM1", however, use the OGM2 button. (Make sure to add in you OGM that the caller cannot leave a message. ) The maximum recording time of an incoming message is 90 seconds. Two-Way Recording With the two-way recording, you can tape a current conversation. The recording is saved as ICM in the same mailbox. During telephone talking, press and hold two-way button for 2 seconds until a long beep is heard. The two-way button can be released at any time after the tone start. The two-way recording is started after the long beep. Press the STOP/TIMER button to stop the recording. In order to play the recorded conversation, press the PLAY button. Verifying the OGM Press and release the OGM1 or OGM2 button and the selected OGM will play. Press the STOP/TIMER button to stop playback before the end of the outgoing message is reached. NOTE: If the unit detects a dial tone, silence or a busy signal, the unit will hang up and not register the message. The unit will shut off if a parallel phone is picked up. When the memory is full, "FU" will appear in the display. When the batteries are low, flat or not installed, "Lo" will blink in the display. MD 40920 9 Tel+AM_MD40920_UK. fm Seite 10 Mittwoch, 7. April 2004 9:52 09 OPERATION OF ANSWERING MACHINE Setting the unit to answering mode ANSWER/RECORD MODE Answer/Record mode In the Answer/Record mode, the unit will play the OGM1 and then record a message. Press the ON/OFF button once; the unit will emit 2 short beeps and then play OGM1. [. . . ] After playback, all messages will still be saved . To repeat the currently playing message, press the "4" pad. To skip backward to previous messages, press "4" and then quickly press "4" again. To skip forward to the next message, press the "6" pad. Recording a memo Call the answering machine from a separate line. [. . . ]