User manual MELITTA CUP PROSPEKTE

[. . . ]  You should leave changes on the installation or setup only to customer service because of the associated hazards. If you have previously moved the device, let it stand still for 2 hours to allow the oil filling to distribute itself uniformly. Make sure that the following requirements are met before using the machine; the safe and flawless operation depends on them!D) – – Requirements on the operation The regular cleaning activities must be performed as described in these instructions. [. . . ] Safety instructions These safety instructions refer only to the product itself. Additional legal operator duties, for example, regarding foodstuff hygiene as well as occupational safety, are published by legislators and not by device manufacturers. Translate the insights from these safety instructions in this manual into operational instructions for your personnel and self-service customers: ❍ Danger to life through electrical shock may exist as well as risk of injury through hot parts when housing parts or covers are opened. € Never open any housing parts or covers unless instructed to do so. there are no operating elements inside. GB ❍ Protect the machine from humidity!There may be danger to life through electrical shock if water reaches device parts other than those specifically intended for contact with water. Never hose it off with water, for example, using a hose or high-pressure cleaner.  Do not continue using the device if damages are visible or apparent malfunctions occur. Important safety functions may malfunction in this case. Have them first inspected and repaired, if required, by customer service, for example – – if the housing is damaged or covers do not close properly, if the power cord or power plug are damaged or if the fuse for the circuit of your system trips repeatedly, If you detect unusual odor development or heat development on the device. Therefore: Keep them inaccessible for children. Follow the warning instructions on the cleaning agent containers. cleaning intervals: Clean the entire device . € – – before its first use or before reusing it after it has been idle for more than 1 week. € – – at least 1 x per day, for example, whenever you clean the milk system of the coffee machine. If a layer of ice more than 3 mm thick has formed in the refrigerator. The refrigerator must then also be defrosted. Always together with the respective cleaning program of the coffee machine. The milk suction hose is then also cleaned. Remove the milk container and put a cleaning container in its place. Fill the cleaning container with a prepared cleaning solution, consisting of 500 ml cold water with 25 ml “SWIRL RFM Cleaner”. [. . . ] The circulating air thereby prevents the formation of odors and mold in the milk area. Never attempt to break the ice layer loose with hard or pointed objects. The surface of the cooling chamber could be damaged in the process. Preventive maintenance Because of the associated dangers, repairs and preventive maintenance activities may be performed only by the customer service or professionals authorized by the manufacturer for this purpose. [. . . ]