User manual MELITTA EPOS 1024-01

[. . . ] Stärkewahltaste | Coffee strength button | Réglage de l'intensité du café | Koffiesterktetoets | Pulsante selezione intensità | Botón de intensidad de café | Knap for kaffestyrke | Knapp för kaffestyrka | Knapp Dear customer, Thank you for choosing the Melitta® epos® filter coffee machine with integrated grinder. These operating instructions will help you to get to know all that the machine has to offer, to prepare the best possible coffee for you and to enjoy your coffee at its most delicious. If you require further information or have any questions, please contact Melitta® or visit us on the Internet at www. Uk We hope you enjoy your new filter coffee machine with integrated grinder. [. . . ] If the bean container is not inserted correctly, a short warning tone sounds The grinder grinds the set quantity of coffee directly Into the filter holder and switches off automatically when it has ground the required quantity. Remove the filter holder from the appliance and level the ground coffee in the filter by shaking the filter holder slightly. Insert the filter holder back onto the upper appliance holder Make sure that it clicks audibly into place. To ensure proper functioning of the grinder, do not use caramelized coffee beans. Do not pour ground coffee into the bean container. The appliance has an overload safety function Of the grinder, which protects the grinder against damage by foreign objects in the coffee beans. If you hear a loud chattering, unknown noise during the grinding process, switch the appliance off and clean the grinder as described in point 6. After the grinder switches off, the brewing mode is activated. For perfect coffee we recommend pre-brewing the coffee. Briefly press the PRE-BREW button before starting brewing to activate this setting for the next coffee preparation. The PRE-BREW button lights up continuously and at the beginning of brewing the water supply is briefly stopped after the coffee has been moistened. Pressing the button again deactivates pre-brewing. The last setting is saved for the next coffee preparation. Start making coffee by briefly pressing the BREW button. If the appliance beeps three times during this process, there is no water in the water tank. During brewing, the water is heated and flows through the rotating spout onto the ground coffee . The appliance stores different brewing profiles depending on the number of cups selected. The ground coffee is evenly moistened by different rotations for each brewing profile. It is also possible to manually control the direction and time of rotation during brewing (see 3. The end of the brewing process is indicated acoustically by a short signal tone. The BREW button now lights up continuously, indicating the warm-keeping phase. The hot plate keeps the coffee hot and then switches off automatically after 40 minutes to avoid unnecessary power consumption. [. . . ] Cleaning is easiest when the bean container and the grinder are completely empty. 2 Cleaning the grinder Empty the grinder completely · To simplify cleaning, the bean container should be If there are only a few beans left in the appliance, set Press the GRIND button and let the machine grind empty. Turn the bean container anti-clockwise and remove it from the appliance. Lift up the handle and pull the grinder ring out of Clean the grinder with a soft brush . [. . . ]