User manual MELITTA EXPRESSO CAFFEO SOLO & MILK

[. . . ] 2015 21:00:59 Safety instructions Please carefully read and comply with the operating instructions. The appliance is intended for home use only and not for commercial purposes. Any other use is regarded as improper and may lead to personal injury and material damage. Melitta® accepts no liability for damage which arises due to improper use of the appliance. [. . . ] 2015 21:01:01 Setting the water hardness The appliance includes a test strip to determine the water hardness. € Determine the hardness of the tap water using the test strip. And buttons • Press the simultaneously for longer than 2 seconds. Button to show the • Press the menu for setting the water hardness. € Set the determined water hardness by pressing the button. The selected water hardness is shown by the bean symbols . water hardness 1: 2: 3: 4: flashing Cleaning and maintenance Warning!€ Pull the power supply plug before cleaning. EN Daily cleaning • Wipe the outside of the appliance with a soft damp cloth and normal dishwashing liquid. °d 0 - 10 °e 0 - 13 °f 0 - 18 Cleaning the steam pipe • Let the steam pipe cool down. € Wipe the steam pipe on the outside with a damp cloth. € Twist off the steam pipe in the direction shown by the arrow (Image F). € Pull the nozzle out of the steam pipe (Image G). € Rinse all of the parts thoroughly with water and dishwashing detergent if necessary. € Clean the nozzle with a pointed object or a brush (Image H). € Twist on the steam pipe the opposite direction as shown by the arrow (Image F). 10 - 15 13 - 19 18-27 15 - 20 19 - 25 27-36 > 20 > 25 > 36 • Press to confirm the selection. Cleaning the brewing unit It is recommended to clean the brewing unit once a week. € Switch off the appliance and pull the power supply plug. Cleaning phase 4 ( bean is flashing): , the middle • The cleaning programme will be continued again and takes about 5 minutes. When illuminates, proceed as follows: • Empty the drip tray and coffee grounds container and insert them in the appliance as usual. The descaling agent can cause skin irritations Comply with the safety instructions and the dosing information specified on the descaling agent packaging. [. . . ] EN - Guarantee Conditions In addition to the end consumer’s statutory guarantee rights in relation to the seller; for new appliances bought after 01 September 2013 from a dealer authorized due to his expertise by Melitta, we give a manufacturer’s guarantee based on the following conditions: 1. The guarantee period begins with the day the product was sold to the end user. The purchase date of the device must be verified by a purchase receipt. The device was designed and built for use in private households. [. . . ]