User manual MELITTA LATTE SELECT ARGENT

[. . . ] 4 Switching on the appliance for the 3 Cleaning the milk unit . The appliance is intended for use in private households to prepare co ee beverages and to heat milk and water. Any other use is regarded as improper and may lead to personal injury and material damage. Only use the appliance if it is in a technically awless condition. [. . . ] If a beverage is not prepared within 1 minute, the appliance switches to single-cup dispensing. The "2×" button cannot be used for mixed beverages that are mixed with hot water Americano), for milk froth, warm milk or hot water. The button also cannot be used when co ee powder is used. You can still change the brewing strength and the beverage quantity during preparation. You can set the brewing strength during the grinding process by pressing the "Brewing strength" button. You can change the beverage quantity by turning the "Rotary Switch". These settings only apply to the current preparation. You can change the default settings for the brewing strength, the beverage quantity and the temperature. For example, to change the brewing strength for an espresso, you need to navigate to the Direct keys > Espresso > Strength menu and select the required brewing strength. The modi ed default settings are stored. You can change the default settings at any time, however. 6 Personal settings ­ My Co ee The My Co ee function allows you to save individual settings for up to six persons in a user pro le. This allows you to choose your individual preferences in terms of brewing strength, beverage quantity and temperature. Six user pro les with preset user names are set up in the My Co ee menu. You can change the user names at any time. Enter a new user name with the "Rotary switch". The user pro le is automatically activated after the new user name is entered. Can also deactivate a user pro le if you do not want to use it. As soon as the user pro le is set up, you can select the personal settings for the brewing strength, the beverage quantity and the temperature. For example, to select the beverage quantity for a cappuccino, you need to navigate to the My Co ee > User name > Cappuccino > Co ee amount menu and select the required beverage quantity. You can change the settings at any time, however. To prepare a beverage with the My Co ee function, you need to press the "my recipes" button repeatedly until the required user name is displayed. [. . . ] Place the new water lter in a vessel lled with fresh tap water for a few Removing the water lter Navigate to the Care > Filter > Remove lter menu. Then adjust the water hardness (see During venting, residual water is removed from the appliance. You should dry out the appliance whenever you do not use it for longer periods, if you want to transport it or if there is a risk of frost. If the water lter is inserted, you will need to remove it from the water tank beforehand. [. . . ]