User manual MELITTA LOOK DELUX

[. . . ] Always keep appliance out of the reach of children. Never allow the cord to come into contact with the warming plate. Always pull the plug out of the socket before cleaning or in case of absence for a long time. [. . . ] Fill needed amount of ground coffee (recommendation: 1measuring spoon = 6g per cup) into the filter. Only LOOK De Luxe & LOOK Selection: by using the Aroma-Selector you can choose the coffee result – from mild to strong – to your personal taste (ቧ). Switch on the appliance – on/off switch lights up (ቩ). As long as the appliance is switched on, the warming plate keeps the coffee warm. Only LOOK De Luxe is equipped with an autoshut-off function – appliances shuts off after 2 hours automatically. It is advisable for best coffee taste not to keep coffee warm for more than 30 minutes to avoid losses in taste and aroma. Switch appliance off between two brewing cycles and leave it to cool down for approx. 5 minutes Cleaning and maintenance • Before cleaning always remove plug from socket • Never immerse appliance or cord in water • Use a soft damp cloth to clean the exterior • Glass jug and filter insert are dishwasher-proof • Descaling: Regularly descaling ensures perfect operation we recommend to descale the appliance after every 40 filtrations. Prepare and use descaler as advised on the package by the descaler manufacturer. For beste kaffesmak, anbefaler vi å ikke holde kaffen varm i mer enn 30 min, for å unngå å miste smak og aroma. Acest aparat nu este destinat utilizarii de către persoane (inclusiv copii) cu handicap fizic, mental, sensorial sau persoane care nu stiu sa il foloseasca, cu excepţia cazului în care acestea sunt supravegheate de către o persoană, care este responsabila pentru securitatea. Kundendienst 4622 Egerkingen Tel: 062 / 3 88 98 30 GB Terms of guarantee In addition to the legal guarantee claims, to which the end user is entitled relative to the seller, for this device, if it was purchased from a dealer authorized by Melitta due to his consulting competence, we grant a manufacturer´s guarantee under the following conditions: 1. The guarantee period begins with the day the product was sold to the end user. The purchase date of the device must be verified by a purchase receipt. [. . . ] Seals and valves) and fragile parts like glass are excluded from the guarantee. Guarantee performances are processed via the Service Hotlines for the respective country (see information below). These guarantee conditions apply for devices purchased and used in UK If devices are purchased in foreign countries or brought into foreign countries, then guarantee performances will only be provided as specified in the guarantee conditions applicable for this country. [. . . ]