User manual MELITTA PASSIONE

[. . . ] 5 Switching on and venting the appliance for the first time. 3 Filling coffee beans into the bean container. 5 Adjusting the outlet for coffee beverages. 8 Emptying the drip tray and coffee grounds container. [. . . ] Some of the basic settings can only be changed in the service mode of the appliance. Press the "Service" button for longer than 2 seconds to call up the service mode. ?» The appliance indicates that it is in one of the service modes described below. Meaning in service mode Energy save programme Information All four basic settings can be reset in service mode to the factory settings (see section 7. 6 Resetting the appliance to the factory settings on page 86). 2 Setting the energy save programme If the adjacent display lights up in service mode, the energy save programme can be set. The energy save programme causes lowering of the heating temperature. The display on the control panel also becomes dimmer. If the appliance is not operated for a long time, it automatically switches to the energy save programme after a specified time. The following times can be set: Information Finish the energy save programme by pressing any button. Press the "Service" button repeatedly until the display for the energy save programme appears. Press the "Coffee strength" button repeatedly until the desired time is set. Call up the next basic setting in the service mode or exit the service mode: a) Briefly press the "Service" button to navigate to the next basic setting. B) Press the "Service" button for longer than 2 seconds to exit the service mode. ?» The new time for switching on the energy save mode is stored. If the adjacent display lights up in service mode, the Auto OFF can be set. If the appliance is not operated for a long time, it switches off automatically after a specified time. The following times can be set: Press the "Service" button repeatedly until the display for the Auto OFF service mode appears. Press the "Coffee strength" button repeatedly until the desired time is set. Call up the next basic setting in the service mode or exit the service mode: a) Briefly press the "Service" button to navigate to the next basic setting. B) Press the "Service" button for longer than 2 seconds to exit the service mode. ?» The new time for Auto OFF is stored. [. . . ] Switch the appliance off and on again (see chapter 4. Rapid alternate flash- Brewing unit is not The display lights up without having been activated: Vent the appliance, turn the rotary regulator clockwise to the stop for this. As soon as water flows out of the Cappuccinatore, turn the rotary regulator anti-clockwise to the stop. We recommend venting the appliance when it is not used for a long period, prior to transport and when there is a risk of frost. [. . . ]