User manual MEMUP KLIP

[. . . ] Power Sources: This product should be operated only from the type of power source indicated on the rating label. For products intended to operate from battery power or other sources, refer to the operating instructions. Lightning: For added protection for this product, unplug it from the wall outlet and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning or power-line surges. [. . . ] Upon initial use, the battery should be charged fully (4 hours) to ensure optimal performance and battery life. Actual play time may vary depending on encoding method used and other factors. 4 Charging KLIP can be charged through a PC USB connection. Plug one end of the USB cable into the player's USB Port and plug the other end into the USB port of a powered-on computer. If the player is connected to a computer through a USB hub, the hub must be self-powered to charge the player's battery. File transfers will extend the charging time. The battery used in this device may present a fire or chemical burn if mistreated. Do not disassemble, incinerate, or heat the battery. Do not connect the player to a power source other than that which is indicated here or on the label as this may result in the risk of fire or electric shock. Turning KLIP On/Off · · To turn KLIP on, hold OK until the LED indicator lights up. To turn KLIP off, hold OK until the LED indicator darkens. Locking/Unlocking KLIP's Keys (Hold) When engaged, the Key Lock feature disables KLIP's controls to prevent accidental key presses when it is in your pocket or bag. · · To lock the player, slide the HOLD switch to the left in the direction of the "HOLD >" symbol. To unlock the player, slide the HOLD switch to the right in the direction away from the "HOLD >" symbol. Play Music Music Playback Controls Use the following controls during music playback. The LED indicator will flash during music playback. Key Action Press OK Start/Pause music playback. While playback is paused, press OK to resume. Press < Press > Hold < Play the previous track. Function 5 Key Action Hold > Press Press + Function Fast-forward through the current track. Increase the volume level. For more information about how to get music onto KLIP, please refer to the section "Connecting to a Computer > Transferring Files". Random Playback (Shuffle) KLIP can play all music files in Normal (repeat) or Random order. · · To play tracks in normal (repeat) order, set the RANDOM switch to the Repeat position. To play tracks in random order, set the RANDOM switch to the Random position. Connecting to a Computer Connect Klip to a computer with the USB cable provided to: · Transfer files to and from the player · Perform basic file management functions. Upon connection: · Your computer will automatically recognize the player as a Removable Disk. An icon representing "KLIP" will appear under "Devices with Removable Storage" when you open "My Computer". [. . . ] Ensure that the headphones are attached securely to the player. 7 The sound quality of the music is poor. If the sound quality is still poor, try downloading the file again or re-encoding the file yourself. Ensure that the bit rate of the file is not too low. The higher the bit rate of the file, the better it will sound. [. . . ]