User manual MERIDIAN AUDIO 507

[. . . ] Meridian 507 Compact Disc Player u s e r g u id e Meridian 507 Compact Disc Player User Guide Sales and service in the UK Meridian Audio Ltd Stonehill Stukeley Meadows Huntingdon PE29 6EX England Tel (01480) 445678 Fax (01480) 445686 World Wide Web http://www. meridian-audio. com Tel Fax (404) 344 7111 (404) 346 7111 Meridian America Inc 3800 Camp Creek Parkway Building 2400 Suite 122 Atlanta GA 30331 Meridian Audio Ltd Stonehill Stukeley Meadows Huntingdon PE29 6EX England Copyright © 2001 Meridian Audio Ltd Part no: 507/1 This guide was produced by Human-Computer Interface Ltd, http://www. interface. co. uk Sales and service in the USA Designed and manufactured in the UK by Preface ii Contents Introduction Introduces the 507 compact disc player, and provides an overview of the other products available in the Meridian 500 Series. Provides step-by-step instructions on how The Meridian 500 Series . . . . . . . . . . . . . . . . . . . . . . . . 2 Sample configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Specification and accessories . . . . . . . . . . . . . . . [. . . ] Press * (Stop). To cancel the repeat function The display will show the total number of tracks on Using the compact disc player the disc. For example: Press Repeat again. --2O To pause play Press = (Pause). The disc will remain spinning and the display will show Pause. For example: 3 Pause 11 Programming a selection With the remote you can programme a selection of tracks, and then play only those tracks you have programmed. Press [ or ] to step through the track numbers until the You can programme a selection either by storing the tracks you want to play, or by clearing the tracks you do not want to play. If you programme a selection by storing the tracks you want to hear, you can play the tracks in any order and repeat tracks in the sequence. You can programme a selection while the disc is playing, in which case the selection will be played after the current track finishes. Using the compact disc player To programme by storing tracks track you want is displayed, or type the number of the track you want. The display will show the track number; for example: Press Store. The display will change to: Track 14 Store 14 Attempting to programme more than 31 tracks will display an error warning: Error You should store the track within two seconds, or it will begin to play. All the other tracks are initially programmed not to play, and will be labelled Clear. 12 To programme by clearing tracks Press [ or ] to step through the track numbers until the track you want is displayed, or type the number of the track you want. The Clear label will change to Store to indicate that the track is stored. To remove a track from a selection Select the track you want to remove, as described above. The display will show the track number; for example: Press Clear. The display will change to: Track 12 Press Clear. This manual. Setting up the compact disc player Radio interference frequency energy and if not installed and used correctly in accordance with our instructions may cause interference to radio communications or radio and television reception. It has been type-tested and complies with the limits set out in Subpart J, Part 15 of FCC rules for a Class B computing device. These limits are intended to provide reasonable protection against such interference in home installations. If any of these items are missing please contact your dealer. We suggest that you retain the packing in case you need to transport the unit. EEC: This product has been designed to comply with the limits set out in EN55013 and EN55020C. 16 Positioning the compact disc player Safety warnings Do not expose the unit to dripping or splashing. Do not place any object filled with liquid, such as a vase, on the unit. Do not place naked flame sources, such as lighted candles, on the unit. Near strong magnetic radiation, such as near a power amplifier. Near to a television, or where connecting cables may be subject to or cause interference. To avoid interference Do not position the compact disc player: To avoid overheating Do not position the compact disc player: In direct sunlight. Directly on top of heat producing equipment, such as a power amplifier. Ensure that air can flow through the cooling slots on the base and top cover. Setting up the compact disc player 17 Connecting the compact disc player Back panel The compact disc player provides three alternative signal outputs to allow you to choose the highest-quality method of connection available on the system to which you are connecting. DIGITAL OUT The 507 Compact Disc Player produces an extremely low-noise low-jitter electrical digital output, and this is the recommended method of connection to digital equipment. Setting up the compact disc player Use this output ANALOGUE OUT To connect to this A 501 Control Unit, or other audio equipment, using conventional analogue audio leads Meridian DSP Loudspeakers, a D/A converter, or digital preamplifier, using digital cable. OPTICAL OUT A D/A converter or digital preamplifier, using optical fibre. The following table lists the equipment which uses each of the three output types: ON OFF LEFT RIGHT ANALOGUE OUT DIGITAL OPTICAL OUT OUT MERIDIAN COMMS RS232 Phono outputs Digital outputs Comms connections PC 18 To connect to other Meridian 500 Series equipment Connect one of the COMMS sockets on the back panel of the compact disc player to one of the COMMS sockets on another 500 Series unit, using the 500 comms lead provided with the other unit. [. . . ] Check that you have not already programmed 31 tracks, as this is the maximum number permitted. Troubleshooting Connect the receiver and this product to different AC outlets. 29 Maintenance Cleaning When cleaning the compact disc player bear in mind that the front of the 507 is plastic, and the display panel and lid are glass. The electrical digital output should be treated in a similar way. reconnect the plugs at least once a year. A proprietary contact cleaner can be used to some advantage. To change the mains fuse Disconnect the power cord before cleaning the unit. [. . . ]