User manual METRONIC DUALSTREAM BOX

[. . . ] Digital Satellite Receiver Ref : 441360 Dualstream BOX Twin tuner 4000 channels Parental lock 2 scarts Wide screen ready DiSEqC 1. 0 ~ 110-250V 50/60Hz 20W S/N YMM441360XXXXXX DiSEqC 1. 0 MET628 CAUTION Your receiver has ventilation slots. These slots must not be obstructed, even partially, in order to ensure proper ventilation. The lifetime of your device depends on these factors. The device may not be exposed to dripping or splashing and no object filled with liquid, such as vases, must be put on the device. [. . . ] 16 · Go to MENU / Installation / Channel search. · On the line Antenna, select (if necessay) with 34 keys, the number which displays the good satellite on the following line. · On the line Transponder, select with the 56 keys the transponder which displays good parameters on the following lines. @ If no transponder displays good values, select the last one, and press on the red key. Then, you will be able to enter manually the characteristics of the new transponder. , Go down on the line from bottom and select TP search. · A windows opens, listing the new channels found. · Select Visualize to exit and see the founding channels or select EXIT to go to the previous menu. B - Automatic channel search · Go to MENU / Installation / Channel search. · On the line Antenna, select with 34keys the number which displays the good satellite on the following line (eg. · Press on the 5 key to select the research mode. · With 4 key, select 1 Satellite search and press OK. · A windows opens, listing the new channels found. · Select Visualize to exit and see the founding channels or select EXIT to go to the previous menu. C - Deletion of a transponder · Go to MENU / Installation / Channel search. · On the line Antenna, select (if necessary) with 34keys the number which displays the good satellite on the following line (eg. · On the line Transponder, select with 34keys the transponder to delete. · Always with 56 keys, select the new site and select OK. · Press EXIT when you have finish your selection. C - Rename a channel · · · · Press MENU key, the stringcourse in the top of the window displays Rename. Select with 56 keys, the channel you want to rename and select OK, the keyboard opens. Select one by one letters, and select OK to validate, press OK to finish your edition. Press EXIT. D - Lock a channel · Press blue key, and enter your secret code (factory settings «oooo»), the stringcourse in the top of the window displays Lock. · Select with 56 keys, the channel you want to lock and select OK, a lock appears after the channel name. · You can lock others channels same way. · Press EXIT when you have finish your selection. D - Favourite channels · · · · Select with 56 keys, the channel you want to put in favorite list. Press OK to put the channel in the group Favorite 1. [. . . ] The operators responsible for the television broadcasts by satellites sometimes change without notice the frequencies and the transponders, we cannot unfortunately guarantee you the exactitude of these programming in time, please accept our apologies on this matter. You will be able to update these parameters if you follow the instructions on page 16. In spite of the care that we brought to the design of our products and the realization of this user manual, you may have encountered problems. Please do not hesitate to contact us, our specialists are at your disposal to advise you : Y hotline@metronic. com IMPORTANT : in the object of your message, make sure the word METRONIC appears. [. . . ]