User manual METRONIC TELECOMMANDE UNIVERSELLE ZAP5 BLACK EVO3 REFERENCE 495316

[. . . ] the universal Metronic remote has been conceived to control most products of each brand. This is why you have the choice between 2 types of set ups : by Brand code or by automatic search. In the set up details below, we use a TV as example. [. . . ] In order to set up the remote for your VCR or satellite receiver, replace `TV' with `VCR' or `SAT'. After you have set up the remote, simply press the TV, SAT, VCR etc key to select the appliance you wish to control. a - Set up by brand code 1 - Switch on your TV. 2 - Look up in the following pages the codes that correspond to the brand of your TV (i. For AEG, you should try the code 0540, then 1423 if the first code does not work, and finally 0513 if none of the two first codes work). 3 - Press the SET and TV keys together for a few seconds until the light switches on. If you wait too long before pressing another key, the remote will go into standby and the light will switch off. Press the key until the light switches off and slowly starts blinking again. This means the automatic search has started. The light should stay on and blink every time a new code is entered. 4 - As soon as the TV switches off, press the 0 key. : You should be quick enough (less than one second) to ensure the remote does not start working on the next code. 5 - As your TV is now switched off, switch it on again using the original remote or with the front keys. 6 - Point the remote towards your TV and try using the main features (changing channels, adjusting sound. [. . . ] 5 - As your TV is now switched off, switch it on again using the original remote or with the front keys. 6 - Point the remote towards your TV and try using the main features (changing channels, adjusting sound. ) If the remote does not control the TV properly, try the automatic set up again (from 2). [. . . ]