User manual METRONIC ZAPBOX TWIN

[. . . ] 2-in-1 Digital Receiver Ref : 441525 3500 channels Parental lock 2 scarts Wide screen ready DiSEqC 1. 0 Sound volume equalizer SATELLITE + FREEVIEW MET531 CAUTION Your receiver has ventilation slots. These slots must not be obstructed, even partially, in order to ensure proper ventilation. The lifetime of your device depends on these factors. The device may not be exposed to dripping or splashing and no object filled with liquid, such as vases, must be put on the device. [. . . ] · Go to the Search Current ANT line and press OK. The Search channels window appears, and the newly found channels are listed and stored. · Press OK and then EXIT to quit the menus. C - Automatic channel shearch · Go in MENU / Installation / Program Satellite. · On the Current Antenna line, select with 34 arrows the number of the first satellite declared (generally, 1). · On the Search Type line, select All with 34 arrows. · On the FTA/CAS type line, select FTA with 34 arrows. · Go to the Search All ANT line and press OK. The Search channels window appears, and the newly found channels are listed and sotred. · Press OK and then EXIT to quit the menus. @Note: the automatic search scans the channels using the TP list associated with each satellite. If the automatic search doesn't find a channel, though you are sure it exists, it is probably because you need first to update the TP list. 21 D - Add / Delete / Modify a transponder To delete a transponder note : deleting out-of-date transponders speeds up the automatic search · Press the blue key, a small circle is displayed after each TP. · With the arrow keys, put the selection bar on the TP you want to delete and press OK. The window on the righthand side of the screen lists the channels carried by the selected TP. If you delete the TP, these channels will be deleted as well. You can select as many TP's as you want, all of them will be simultaneously deleted. · Once your selection is over, press EXIT, a confirmation window is shown. Select Yes and press OK to confirm deletion. To add a transponder · Put first the selection bar on a TP belonging to the same satellite as the one for which you want to add a TP. If you can't find any, press the red key to turn in All mode. If you still can't find any, it means that the satellite is not pre-programmed ; you will have to add it as explained in the paragraph called Adding a satellite. · Press the yellow key, the Add window pops up. · Enter the 5 figures of the frenquency and press 6 · Select the polarity with 34 arrows and press 6 · Enter the 5 figures of the Symbol Rate and press 6 · Press OK on the Store line to save this new TP. To modify a transponder · · · · · · Put first the selection bar on the TP you want to modify. [. . . ] They will eventually replace analogue channels in terrestrial transmission. Please note that some channels (for ex. , BBC1) can be broadcasted in both analogue and digital format. Number which helps identify specific data (audio, video, clock) in a digital data flow. Orientation of the wave sent by the transmitter. [. . . ]