User manual METZ 20 TM 52

[. . . ] Operating with the buttons on the TV set 41 Operating with Remote Control . The remote control handset sends its commands to the TV set with the aid of infra-red light. For this reason, it must always be pointed towards the TV set in order to operate correctly. Use of the remote control may possibly interfere with other devices or systems which are controlled by infra-red signals (such as infra-red headphones). [. . . ] press Blue ( ) button to activate "Cancel" function of "Insert" process. Delete: For "Delete" process it is pressed to yellow ) button, (Name, Insert and ( Autostore functions are inactive). Pressing yellow button again erases the selected programme from the programme list, and the programmes below shift one up. press) button cancels the activated Delete process. Autostore: To enter Autostore menu, press to the blue button. To learn the features of this function see "Autostore" below. Autostore, searches and stores all channels automatically on your TV, according to the transmission of programme systems in your area. At the bottom of the menu there is a programme sort functions section. By Delete you can delete programmes that you decided. To change that letter or button can be used, and to select the other letters, or button can be used. First of all choose the Country by using or button. In the programme list you will see the programme numbers and names assigned to the programmes. If you do not accept the locations and/or the programme names of programmes, you can change them in Programme menu. Programme Number, Programme Name (or AV), (they are displayed on the upper left of the screen) and Sleep Timer (shows the time left on the upper right screen if enabled). The sound indicator and picture mode are displayed with them too. They are displayed after programme change during 3 seconds. You can switch your TV to AV modes by pressing directly to AV button or by selecting in source menu from the main menu. While in AV mode, you can also switch your TV to TV or other AV modes by selecting in source menu from the main menu. These OSDs are displayed when a new programme is entered by digit button or by pressing , P-, P+, TV, AV button. This button is used to reenter to the preceding entered programme again. In main menu, firstly use or button then use / or MODE button to enter Source menu. In source menu, move the cursor by or button and then press MODE button or or buttons when the cursor is on the required item. [. . . ] Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer For Monitor : Check that power cord of the Display has been connected securely into wall outlet or grounded extension cable or strip. Display is equipped with electronic power switch, it will remain power-off in case of any power failure. It is necessary to push power switch again to power-on the display. [. . . ]