User manual MICROSOFT WIRELESS COMFORT DESKTOP 5000 QUICK START GUIDE

[. . . ] This document includes important information about many Microsoft products. Refer to sections that apply to the features of your device: Important Safety Information AC-Powered Devices Battery-Powered Devices Headset Devices Wireless Devices Keyboard and Mouse Devices Devices with Laser Pointers All Devices Laser and LED Specifications Regulatory Information Radio Frequency Technical Specifications Radio and TV Interference Regulations Disposal of Waste Electrical and Electronic Equipment Patent Information Customer Support Options Limited Warranty This symbol identifies safety and health messages in this Product Guide and other product manuals. Important Safety Information AC-Powered Devices These precautions apply to all products that plug into a standard wall power outlet. Failure to take the following precautions can result in serious injury or death from electric shock or fire or in damage to the device. 006 Part No. X2-29436-03 X12-29436-03_Mnl_Product_Guide_N1 1 10/3/2006 11:42:42 AM To select an appropriate power source for your device: Use only the power supply unit and AC power cord that came with your device or that you received from an authorized repair center. [. . . ] Laser pointers are designed to illuminate inanimate objects. Do not allow minors to use a pointer unsupervised. Do not point a laser pointer at a mirror-like (reflective) surface. A reflected beam can act like a direct beam on the eye. Do not use the device outside of its specified operating temperature range +41ºF (+5ºC) to +95ºF (+35ºC). If the device is exposed to an environment outside of its prescribed operation, turn off the device and allow the temperature to stabilize within the specified operating range before using the device. Do Not Attempt Repairs Do not attempt to take apart, open, service, or modify the hardware device or power supply. Doing so could present the risk of electric shock or other hazard. Any evidence of any attempt to open and/or modify the device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty. Laser and LED Specifications Caution Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. Laser Devices This device complies with International Standard IEC 60825-1:2001-08 for a Class 1 and Class 2 laser product. This device also complies with 21 CFR 1040. 10 and 1040. 11 except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001. 4 X12-29436-03_Mnl_Product_Guide_N4 4 10/3/2006 11:42:43 AM Class 1 Laser Devices CLASS 1 Beam description: Collimated (parallel) beam of infrared light (invisible to LASER PRODUCT the user) Laser power output: < 716 microwatts (at 832 nanometers) to 834 microwatts IEC 60825-1:2001-08 (at 865 nanometers) Emitted laser wavelength: nominal: 850 nanometers, range: (832 ­ 865 nanometers) A Class laser product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1 and 21 CFR 1040. 10. However, it is recommended that you not direct the laser beam (which is emitted from the bottom of the device) at anyone's eyes. Disconnect the I/O devices one at a time and see if the interference stops. If this hardware device does cause interference, try the following measures to correct it: Relocate the antenna of the other radio-communications device (for example AM/FM radios, televisions, baby monitors, cordless phones, etc. ) until the interference stops. Move the hardware device farther away from the radio or TV, or move it to one side or the other of the radio or TV. Plug the computer into a different power outlet so that the hardware device and radio or TV are on different circuits controlled by different circuit breakers or fuses. If necessary, ask your computer dealer or an experienced radio-TV technician for more suggestions. For more information about interference issues, go to the FCC Web site at: http://www. fcc. gov/cgb/consumerfacts/interference. html. Read through all printed documentation. For additional product information, go to the Microsoft Hardware Web site at www. microsoft. com/hardware. For up-to-date help about using or troubleshooting your device, go to the Microsoft Help and Support Web site at http://support. microsoft. com. If you still have a question, see the following Microsoft support options. Product Name: OEM Distributed: Microsoft Hardware Devices If this product came with a new computer or device, the hardware manufacturer provides technical support. [. . . ] If an upgrade to SOFTWARE is delivered with a new limited warranty, then the terms of that new limited warranty will apply only to the SOFTWARE as upgraded, but will not apply to the original Hardware Device; Except as otherwise required by legislation in Your jurisdiction, costs associated with transport (including packaging) for warranty service shall be at Your expense; and Microsoft does not provide any warranties regarding any other services provided under this Limited Warranty and disclaims all duties (if any) of workmanlike effort or of lack of negligence regarding such services. TO THE FULL EXTENT ALLOWED BY LAW, MICROSOFT AND ITS SUPPLIERS, AFFILIATES AND AGENTS ARE NOT LIABLE FOR ANY: (i) CONSEQUENTIAL OR INCIDENTAL DAMAGES; (ii) DAMAGES OR LOSS OF ANY NATURE WHATSOEVER RELATING TO LOST PROFITS, BUSINESS INTERRUPTION, LOSS OF X12-29436-03_Mnl_Product_Guide_N11 11 10/3/2006 11:42:44 AM DATA OR PRIVACY OR CONFIDENTIALITY, ANY INABILITY TO USE ALL OR PART OF THE HARDWARE DEVICE OR SOFTWARE, PERSONAL INJURY, OR ANY FAILURE TO MEET ANY DUTY (INCLUDING BUT NOT LIMITED TO ANY DUTY OF NEGLIGENCE, GOOD FAITH OR OF WORKMANLIKE EFFORT); OR (iii) INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE SOFTWARE OR HARDWARE DEVICE. THE FOREGOING APPLIES EVEN IF MICROSOFT OR ANY SUPPLIER, AFFILIATE OR AGENT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES; AND EVEN IN THE EVENT OF FAULT, TORT (INCLUDING NEGLIGENCE), STRICT OR PRODUCT LIABILITY, MISREPRESENTATION OR OTHER REASON. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusions many not apply to You. [. . . ]