User manual MICROSOFT WIRELESS ENTERTAINMENT DESKTOP 7000 QUICK START GUIDE

[. . . ] Use and replace only with the same type and rating as the batteries provided. Charge only with the recharger provided with the product. Extended exposure to high volumes when using a headset may result in temporary or permanent hearing loss. Before boarding any aircraft or packing a wireless device in luggage that will be checked, remove the batteries from the wireless device or turn the wireless device off (if it has an on/off switch). [. . . ] Confirm that they are rated to handle the total current (in amps [A]) drawn by the device (indicated on the power supply unit) and any other devices that are on the same circuit. To avoid damaging the power cords and power supply: Protect the power cords from being walked on. Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply unit, and the device. Do not jerk, knot, sharply bend, or otherwise abuse the power cords. Do not expose the power cords to sources of heat. Keep children and pets away from the power cords. Do not allow them to bite or chew on them. When disconnecting the power cords, pull on the plug--do not pull on the cord. If a power cord or power supply becomes damaged in any way, stop using it immediately. Unplug your device during lightning storms or when unused for long periods of time. For devices with an AC power cord that connects to the power supply, always connect the power cord according to the following instructions: 1 Plug the AC power cord into the power supply until it stops. 2 Plug the other end of the AC power cord into the wall outlet. Battery-Powered Devices These precautions apply to all products that use rechargeable or disposable batteries. If you have questions about how your own lifestyle, activities, or medical, or physical condition may be related to MSDs, see a qualified health professional. Devices with Laser Pointers Caution Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not shine a laser pointer at anyone. Laser pointers are designed to illuminate inanimate objects. Do not allow minors to use a pointer unsupervised. Do not point a laser pointer at a mirror-like (reflective) surface. A reflected beam can act like a direct beam on the eye. Do not use the device outside of its specified operating temperature range +41ºF (+5ºC) to +95ºF (+35ºC). If the device is exposed to an environment outside of its prescribed operation, turn off the device and allow the temperature to stabilize within the specified operating range before using the device. All Devices Do Not Attempt Repairs Do not attempt to take apart, open, service, or modify the hardware device or power supply. Doing so could present the risk of electric shock or other hazard. Any evidence of any attempt to open and/or modify the device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty. Caution Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. Laser and LED Specifications Laser Devices This device complies with International Standard IEC 60825-:200-08 for a Class and Class 2 laser product. This device also complies with 21 CFR 1040. 10 and 1040. 11 except for deviations pursuant to Laser Notice No. [. . . ] For complete product information, see the on-screen Help file installed with the device software. For the latest product information and software updates, go to the Microsoft Hardware Web site at www. microsoft. com/hardware. Move the hardware device farther away from the radio or TV, or move it to one side or the other of the radio or TV. Plug the computer into a different power outlet so that the hardware device and radio or TV are on different circuits controlled by different circuit breakers or fuses. 7 X12-29435-03_Mnl_Product_Guide_w7 7 10/3/2006 11:13:39 AM Information in this document, including URL and other Internet Web site references, is subject to change without notice. [. . . ]