User manual MICROSOFT WIRELESS MOUSE GETTING STARTED

[. . . ] If you have questions about how your own lifestyle, activities, or medical or physical condition may be related to MSDs, see a qualified health professional. Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the example companies, organizations, products, domain names, email addresses, logos, people, places and events depicted herein are fictitious, and no association with any real company, organization, product, domain name, e-mail address, logo, person, place or event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation. [. . . ] Alkaline batteries are recommended, and two alkaline batteries are included in the package. Note To preserve battery life, the mouse automatically enters power saving mode when not in use, so there is no need for a power switch. Turn the mouse upside down, and then remove the battery compartment cover. Insert the batteries, making sure to properly orient the positive (+) and negative (­) ends as specified by the battery compartment labels. Important Before boarding any aircraft, remove the batteries from the wireless mouse. The wireless mouse can emit radio frequency (RF) energy, similar to a cellular telephone, whenever batteries are installed and the mouse is activated either by touch or button press. 3 Position the Wireless Mouse and Receiver For optimum performance, position the receiver so that it is at least 8 inches (20 cm) away from the mouse and any items that might cause interference, such as computer monitors, large metal objects (including metal furniture), desktop fans, or fluorescent lights. The mouse may work up to 6 feet (1. 8 m) away from the receiver, but this distance varies depending on positioning, nearby items causing interference, and other factors. 2 4 Connect the Receiver to the Computer The connection procedure depends on the type of computer you are using and the connectivity supported for your mouse as specified on the package. If your mouse is PS/2 compatible, a PS/2 connection is recommended for a Windows-based computer. Important Use an adapter plug only if it is included with your Microsoft mouse. If your mouse cable has a round PS/2 connector, plug it into your computer's round PS/2 mouse port. Or, if your mouse has a USB-to-PS/2 adapter, attach it to the Universal Serial Bus (USB) connector, and then plug it into your computer's round PS/2 mouse port. USB Connection (Windows or Macintosh) · With your computer turned on, plug the rectangular USB connector into your computer's USB port. PS/2 Connection USB-to-PS/2 Adapter USB Connection 3 5 Test the Mouse Try using the mouse. If it does not work as expected, make sure the following procedures were completed as specified earlier in these instructions: · New batteries were inserted correctly. · The receiver was properly connected to the computer. · The receiver and mouse were properly positioned. If the mouse is still not working, try changing the channel. Changing the wireless connection channel is useful if you are experiencing interference. To change the wireless connection channel · Press the button on the bottom of the wireless mouse. If changing the channel does not solve the problem, you may need to reconnect the mouse to the receiver. To reconnect the mouse to the receiver 1. Make sure that the mouse and receiver are positioned as specified earlier in these instructions. Press the button on the top of the wireless receiver. [. . . ] This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Any changes or modifications not expressly approved by Microsoft could void the user's authority to operate this device. For use with UL Listed and GS approved personal computers. [. . . ]