User manual MICROSOFT WIRELESS SUITES GETTING STARTED

[. . . ] If you have questions about how your own lifestyle, activities, or medical or physical condition may be related to MSDs, see a qualified health professional. About Your Rights and Obligations This Microsoft® wireless suite is comprised of a keyboard, mouse, and receiver and is sold as a single unit and may not be separated for use on more than one computer. The software with this product is licensed, not sold. You must either agree to the license contract in the software Setup screens or promptly return the Microsoft wireless suite, comprised of the keyboard, mouse, and receiver, along with the software, for a refund, excluding the return costs. After you install the software, you may consult the license and the Limited Warranty for the product at any time by looking in the "Legal Information" section of the software User's Guides. [. . . ] X09-51612-03 To insert the batteries 1. Turn the device upside down, and then remove the battery compartment cover. Insert new batteries, making sure to properly orient the positive (+) and negative (­) ends as specified by the battery compartment labels. Close the battery compartment cover. 3 Position the Receiver, Keyboard, and Mouse For optimum performance, position the receiver so that it is at least 8 inches (20 cm) away from the keyboard, mouse, and any items that might cause interference. Items that might cause interference include: computer monitors, large metal objects (such as computer cases and metal furniture), desktop fans, or fluorescent lights. The keyboard or mouse may work up to 6 feet (1. 8 m) away from the receiver. This distance varies depending on the positioning of the receiver and wireless devices, nearby items causing interference, and other factors. 4 Connect the Receiver to Your Computer The connection procedure depends on the type of computer you are using. A PS/2 connection is recommended for Windows-based computers because Universal Serial Bus (USB) keyboards may not be fully supported on these systems. PS/2 connection (Windows) 1. Plug the purple PS/2 connector into the computer's round PS/2 keyboard port, which may be similarly colored and labeled with a keyboard icon. Attach the green USB-to-PS/2 adapter to the USB connector, and then plug it into the computer's round PS/2 mouse port, which may be similarly colored and labeled with a mouse icon. Turn on the computer. PS/2 connection USB connection (Windows or Macintosh) · With your computer turned on, plug the rectangular USB connector into your computer's rectangular USB port, and leave the round PS/2 connector unplugged. USB connection Important Before using this product, read about the potential for radio interference in the topic titled "Radio and TV interference regulations" in the User's Guides installed with the software. 2 5 Test the Keyboard and Mouse Try using the keyboard and mouse to make sure that they are working. If either device does not work as expected, make sure the following procedures were completed as specified earlier in these instructions: · New batteries were inserted and positioned correctly for each device. · The receiver was properly connected to the computer. · Both devices were properly positioned and there are no nearby items that might cause interference. If the keyboard or mouse is still not working, try changing the wireless connection channel for the device. Changing the wireless connection channel is useful if your wireless device has more than one channel and you are experiencing interference. To change the wireless connection channel · Press the button on the bottom of the wireless keyboard or mouse. If changing the channel does not solve the problem, you may need to reconnect the device to the receiver. To reconnect the keyboard or mouse to the receiver 1. Make sure that the device and receiver are positioned as specified earlier in these instructions. Press the button on the top of the wireless receiver. The receiver lights blink to indicate that it is in "connect" mode. Press the button on the bottom of the device. The wireless device may not work for a few seconds until the reconnection process is completed. [. . . ] and Canadian radio interference regulations, search for "regulations" in the User's Guide installed with IntelliType Pro or IntelliPoint software. Microsoft Corporation; One Microsoft Way; Redmond, WA 98052-6399; U. S. A. United States: (800) 426-9400 Canada: (800) 933-4750 No serviceable parts included. This device is rated as a commercial product for operation at +41ºF (+5ºC) to +95ºF (+35ºC). RF Technical Specifications RF output power: < 80 dBµV/m at 3 m Keyboard with two channels ­ RF frequencies: 27. 095MHz (channel 1), 27. 195MHz (channel 2) Keyboard with a single channel ­ RF frequency: 27. 195MHz Mouse with two channels ­ RF frequencies: 27. 045MHz (channel 1), 27. 145MHz (channel 2) Mouse with a single channel ­ RF frequency: 27. 145MHz Information for Optical Mouse Products Only User-observable light is 15 microwatts in normal operation. [. . . ]