User manual MICROSOFT XBOX WIRELESS ADAPTER

[. . . ] check whether you are ready to begin This Start Here guide will help you set up your Microsoft® Broadband Networking Xbox® Wireless Adapter on a Microsoft Xbox video game system. Before you go to the next page, make sure that you have everything you need to begin. To play games on the Xbox LiveTM online game service, you need: O O O O 2 connect wireless adapter If you just purchased a router, base station, or gateway, set it up before setting up this adapter. 3 install Xbox Dashboard update Insert the Xbox wireless adapter setup disc into the disc tray of your Xbox console. [. . . ] X09-97724 4 configure wireless adapter On the Wireless Settings screen, enter information about your network. If you are connecting to an existing network that you chose on the Select Network screen: O 5 test network connections Check your wireless connection status on the Wireless Status screen: O m Specify the Security Type and Security Key if your network uses wireless security. Do not change any other settings on this screen. The Xbox wireless adapter supports both 128-bit and 64bit WEP. The security type and security key that you specify on your Xbox wireless adapter must match those specified on your other network devices. If your adapter is correctly configured for the network, your connection status will appear as Connected. If your connection status appears as Not Connected, select Settings to review your wireless settings. O start here Try one of these tests to confirm that the setup of your adapter was successful: O If you are setting up the first Xbox console for System Link (console-to-console) play: O If you added your Xbox console to an existing network with a shared broadband Internet connection, start a game that is supported by Xbox Live. Make sure that you can access the service with your account. If you connected two Xbox consoles, start a game that supports System Link play. Use the System Link play option in the game, and make sure that you can play with the team that is using the other Xbox console. If you have other Microsoft Broadband Networking products installed on your network, start the Broadband Network Utility from a computer on your network. Make sure that your Xbox wireless adapter appears under Network Devices. Select Network Name to create a wireless network name (SSID). When you set up the wireless adapter on your second Xbox console, this name will appear on the Select Network screen. Select Network Mode, and then specify the network mode as ad hoc 802. 11b/g. When you set up your second Xbox wireless adapter, it will use the same channel. Select Security Type to enable wireless security. Wireless security helps protect your wireless network from unauthorized access. [. . . ] The password must contain no fewer than 3 characters and no more than 16. If you do not specify a password, you must use the default password, admin, to update your adapter. To troubleshoot network problems Check out the following resources to help identify and solve common problems: O The User's Guide contains basic troubleshooting instructions and technical support information. Our Web site at www. microsoft. com/ broadbandnetworking includes the most recent troubleshooting information and product updates. O O Microsoft® Broadband Networking Xbox Wireless Adapter MN-740 ® [. . . ]