User manual MICROTEK ADF-650 INSTALL GUIDE

[. . . ] Macintosh® and Apple® are registered trademarks of Apple Computer, Inc. Windows® is a registered trademark of Microsoft Corporation. All other products or name brands are trademarks of their respective holders. Important Documents you scan may be protected under copyright law. [. . . ] Turn on your scanner, and wait for the light on the scanner's front panel to stop blinking and stay on steady. Your system will detect the scanner with ADF-650/ 651 automatically, indicating that the ADF-650/651 is ready to scan. Microtek ADF-650/651 Installing and Getting Started 3 Scanning Text Originals for OCR 1. Make sure you have ScanWizard 5 installed on your computer, and do not load any material at this point. Launch ScanWizard 5 in stand-alone mode. Specify your own scan settings by clicking on the Tool buttons in the Standard Control Panel (see settings below); or by selecting the appropriate setup items from the Settings window in the Advanced Control Panel. a) Click the Original button, then select Text Document as your scan material type. b) Click the Scan Type button, then select Black & White as your output image type. c) Click the Purpose button, then select OCR Text. Note: When scanning colored text originals, you must select "Photo" and use either True Color/Web Color (unless B/W is the chosen output). Place the stack of paper to be scanned on the document feed tray. a) Open the top Tray Flap and load the stack of papers on the feed tray, with the side to be scanned facing up. Push the paper stack into the tray, until the edges of the paper touch the feeder rollers. Tray Flap Note: The ADF-650/651 is not designed for scanning photos. Microtek accepts no responsibility for damages that may arise from misuse of equipment. 4 Microtek ADF-650/651 Installing and Getting Started b) Pull out the top tray extender for better paper support if the length of the originals exceeds 10 inches. Feed tray Tray extender Output tray c) Align the material with the center of the feed tray by sliding the two guide arms in toward the stacked sheets if the width of the originals is less than 8. 5 inches. Guide arms Output tray extender (ADF-651 only) Note: To preview a single sheet only: Click the Preview button (Overview button in Advanced Control Panel) to perform a preliminary view of the entire document. The previewed sheet will then roll from the feed tray of the ADF-650/ 651 to the output tray. Load the previewed sheet along with the paper stack on the document feed tray. Click and hold the Scan to button in the ScanWizard 5 software. When the options menu appears, select OCR. When the OCR: Save As dialog box appears, use the default "Document" file name, or key in your preferred file name and select the export file format (. rtf, . txt, . htm, . xls, or . pdf ) . The default language for OCR is English. To change the language, select your preferred language from the OCR Language options menu. [. . . ] Check for residue on the rollers if paper flow through the rollers becomes erratic. Open the feeder cover to periodically clean the rollers with a lint-free cloth or a swab moistened with water. Note: Do not attempt to turn the roller while cleaning, as this may damage the train drive mechanism of the ADF-650/651. Roller Roller Specifications Capacity Paper Basis Weight Paper Size Accuracy 50 sheets of copy bond paper (unfolded) 16 to 24 lb. A6 (105 mm x 148 mm) (4. 14" x 5. 83") Max. [. . . ]