User manual MICROTEK GNC HOWTO INSTALL4700 XXXX

[. . . ] Installing and Getting Started for the ScanMaker® 4700 Version Version for PC (Windows 98 / 2000 / 2000 PRO) and Mac (Apple iMac / G3 / G4 with built-in USB ports) This document provides information on how to install your Microtek scanner on a PC or Mac using the scanner's USB interface and describes the features of the five scanner buttons on the front panel of the scanner. Installation for PC and Macintosh 1. Unpack scanner Open your scanner package and check the components as stated in your packing list. Before proceeding any further, check that you have the items listed on the packing list. If any item is missing, contact Microtek Customer Service. [. . . ] d) Caere PageKeeper Standard This is your document Standard. management program. Restart your Macintosh. Installation for PC and Macintosh 4. Plug the power adapter into the back of the scanner, and plug the other end into a wall outlet or power source. Make sure no other cable is connected to the point. scanner except the power adapter at this point 2. Press the scanner's power switch at the back of the scanner. The green light on the front of the scanner will blink for a few seconds and then stay on solid. Connect one end of the USB cable to your computer, and connect the other end of the cable to the scanner's USB port. For PC users For Macintosh users On On Off Off On 3 Off Español Nederlands Italiano Français Deutsch English English Installation for PC and Macintosh 5. Reading the documentation For PC users 1. Insert the Microtek CD-ROM into your CD-ROM drive. When the Microtek Software Installer comes up on your screen, click the View Manual button that corresponds to the manual you wish to read. This will launch Adobe Acrobat Reader, and you can then read or print the manual. Deutsch 6. Troubleshooting If you encounter installation problems, see the troubleshooting file in the Techinfo folder on your Microtek CD-ROM. Français Nederlands 2. Italiano Español Click the "View Manual" button to see the manuals For Macintosh users 1. Insert the Microtek CD-ROM into your CD-ROM drive. Launch the Adobe Acrobat Reader program. From the File menu, choose the Open command, and open the file for the manual that you wish to view; manuals have a . pdf extension to their file name. The manual is then ready to be viewed or printed. 4 How to Scan There are three different ways to scan: A. Launching ScanWizard 5 as a stand-alone program from application. Scanning from an image-editing application Each method is described below. The ScanMaker 4700 is equipped with five scanner buttons on the front panel that give you quick access to the most frequently used functions. These buttons are Scan, Copy, E-mail, Cancel and Setup. The parameters for each button can be set through the Microtek Scanner Configuration (MSC) utility. Scan Captures high resolution images with outstanding quality that can automatically be saved as files or sent to another application for further processing. Copy Scans the image and sends it to your printer, transforming your scanner and printer into a convenient copy station. [. . . ] Aside from saving, you may also deliver the scanned image to an image-editing software, an e-mail editor, or a web browser. Save the scanned image to a file, or deliver it to an image-editing program, an e-mail editor, or a web browser. following: Take note of the following · When ScanWizard 5 is launched, pressing either the Scan, Copy or E-mail button from the scanner's front panel will automatically perform a "fast preview" of the material. The "Scan to button from the ScanWizard 5 Scan to" control panel will stay or be transformed into Copy or E-mail according to the function selected on the front panel button. · The Setup button control can only be used for the MSC utility. It is disabled or not functional when using 5. [. . . ]