User manual MICROTEK GNC HOWTO INSTALL4800 XXXX

[. . . ] 1 Docum entatio n 2 PC Unlock 3 MAC B 4 PC 5 A MAC A B Unpack the scanner and check components Unpack the scanner package and check for major components. Please refer to the enclosed Packing List for a detailed listing of your components. Microtek Scanner Power Adapter USB (Universal Serial Bus) Cable Documentation Microtek CD-ROM Unlock the scanner carriage With the scanner power off, locate the carriage safety lock on the underside of the scanner (front-right corner). Slide the lever slightly to the right until you hear a "click, " indicating that the scanner carriage has been unlocked. Install the software PC: A. [. . . ] Conecte a extremidade do cabo USB do computador no computador. Conecte a outra extremidade do cabo USB na porta USB do scanner. O sistema detectará automaticamente o scanner. Use only power supplies (AC/DC adapters) listed below: Voltage 100V to 120V Manufacturer 1. HPW-1512A LSE9801B12 DSA-0151A-12 HPW-1512B LSE9801B12 DSA-0151A-12 200V to 240V Energy Star Notice As an ENERGY STAR Partner, Microtek International, Inc. has determined that this scanner meets the ENERGY STAR guidelines for energy efficiency. Visit us at www. microtek. com Microtek International, Inc. I49-003095 A 6 A 7 8 9A 9 PC MAC Scan Copy E-mail OCR Scan-to-Web 9B Place the scan material A. Place the original to be scanned on the scanner bed. The top end of the original should be positioned towards the front end of the scanner with the surface to be scanned facing down. Launch ScanWizard 5 To launch ScanWizard 5 as a stand-alone program, double-click the ScanWizard 5 icon on your desktop. By default, the scanner will detect the settings under Original, Scan Type and Purpose; and automatically perform a fast preview of your image based on those settings. Select preferences You can use the following tool buttons to change the settings according to your preferences. Original defines category of the original (scan material). Scan Type selects output image type (color, gray, or B&W). Purpose defines image resolution to match your target application. NOTE: Click the Scale Output, Adjust, and Reset buttons if you need to make further adjustments. Scan your material A. Click the Scan to button from the ScanWizard 5 Control Panel. When the Save As dialog box appears, specify the folder location, a file name, and the format for the output image, then click Save. The image is then scanned and saved to the specified location. Send image to application after saving: If this option is checked, the scanned image is saved first, then automatically delivered to an image-editing software, an e-mail editor, or a web browser as indicated in the destination box. Scanner Button Controls The ScanMaker 4800 is equipped with five scanner buttons, providing quick access to the most frequently used functions. These buttons are Scan, Copy, E-mail, OCR , and Scan-to-Web. The parameters for each button can be set through the Microtek Scanner Configuration (MSC) utility. (NOTE: You need to exit ScanWizard 5 before accessing the MSC utility). To launch the MSC utility, you can either: (For PCs) Go through the Windows menu -- click Start, Programs, ScanWizard 5, MSC; or (For PCs or Macs) Double-click the MSC icon on your desktop. When the MSC panel appears, click any of the 5 tabs to specify the Scan settings accordingly. [. . . ] Quando a caixa de diálogo Salvar como aparecer, especifique o local da pasta, um nome de arquivo e o formato da imagem de saída e clique em Salvar. Em seguida, a imagem será digitalizada e salva no local especificado. Enviar imagem para o aplicativo após a gravação: Se esta opção estiver marcada, a imagem digitalizada será salva inicialmente e, em seguida, enviada automaticamente para um software de edição de imagens, um editor de correio eletrônico ou um navegador de Web, conforme indicado na caixa de destino. Controles dos botões do scanner O ScanMaker 4800 é equipado com cinco botões fornecendo acesso rápido às funções mais usadas. Estes botões são Scan, Copy, E-mail, OCR e Scan-to-Web. [. . . ]