User manual MICROTEK GNC I S430 0205

[. . . ] Scan Type ­ Selects the output image type (color, gray, or B&W). Purpose ­ Sets the image resolution to match your target application. NOTE: To lock the scanner (for shipping and other reasons), turn the locking screw counterclockwise until the arrow mark points to the "Locked" position. Do not turn the scanner upside down and attempt to lock the scanner this way. Software CD White Mat NOTE: Click the Scale Output, Adjust, and Reset buttons if you need to make further adjustments. For details on how to use the Advanced Control Panel, refer to the ScanMaker s430 Supplement PDF document in the Microtek CD-ROM. Connect Scanner Power adapter Hi-Speed USB cable To the scanner lid Make sure the scanner lid (with built-in transparency adapter) is properly installed, with its connector securely connected to the scanner's 9-pin accessory port. Install Software C Important: Do not remove the yellow stickers from your scanner until you are told to do so. You must install software before connecting your scanner. [. . . ] Use the USB 1. 1 port only if your computer does not have Hi-Speed USB. · · Scan Copy E-mail OCR PDF TURN OVER TO CONTINUE Using the EZ-Lock Film Holder A. Load the filmstrip inside the EZ-Lock Film Holder, with the film's shiny base facing down. Using ColoRescue Scanning Film 1. In the Standard Control Panel, click the Original button, and choose "Negative Film" to scan negatives, or choose "Positive Film" to scan slides. Do You Need Assistance? Manuals If you have additional questions and need further instruction or information, we provide PDF manuals for: 1. Using your ScanMaker s430 (Supplementary information) 2. Using the ScanWizard 5 scanning software 3. Using the bundled third-party software To access the PDF manuals: Insert the scanner's software CD-ROM into your computer's CD-ROM drive. Next, locate and click the "Manuals" option when the software installer window appears on your screen. Finally, select and click the title of the manual you wish to view. Missing Items Restoring Color in Photos The Microtek ColoRescueTM system is an automatic color recovery process that restores faded color in both photos and film to their original luster. Raise the scanner lid, and place the EZ-Lock Film Holder on the scan bed. The holder should be flush against the front right edge of the scan bed, with the filmstrip slot running down the center. When the Standard Control Panel appears, click the Switch icon on the upper right corner to switch to the Advanced Control Panel. If your package is missing items, please call the number below. Customer Service Department 310-687-5940 Visit www. support. microtek. com/bronze/ for Customer Service hours. Free 24/7 Online Technical Assistance Go to the Microtek support site at www. support. microtek. com for: 2. Click the Preview button in the Standard Control Panel to perform a preliminary scan of the image. Click the Scan to button to scan the image. In the ScanWizard Settings window, check the "Automatic Color Restoration" check box. The next time you scan faded photos or film, ColoRescue will restore the faded colors to their original brilliance. Click Switch icon · KnowledgeBase - Type in a question or browse through articles for faqs, troubleshooting tips, how-to guides and more. The Microtek KnowledgeBase gives you answers at your fingertips, 24 hours a day. Downloads - Access manuals or the latest drivers and updates for your product. · Do not block calibration window For details on how to scan film using the Advanced Control Panel, refer to the ScanMaker s430 Supplement PDF document in the Microtek CD-ROM. Personal Email Assistance Also free of charge, Microtek's technical support team will answer your personal email questions within 2 business days after you've filled out the easy online form at www. support. microtek. com/emailsupport/ Personal Telephone Assistance B. Raise the scanner lid, and place the EZ-Lock Film Holder on the scan bed. The holder should be flush against the front right edge of the scan bed, with the slot for slides running down the center. Microtek basic installation telephone support is available free of charge for 90 days from your purchase. [. . . ] From the ScanWizard 5 Standard Control Panel, go to the Original button category, then proceed to the Film subcategory and make sure you select either the Positive or Negative option. Uninstall and reinstall the ScanWizard 5 software. Use only power supplies (AC/DC adapters) listed below: Voltage 100V to 120V 200V to 240V Manufacturer 1. DSA-0151A-12 S HDAD15W101-123 DSA-0151A-12 UP HDAD15W101-124 Energy Star Notice As an ENERGY STAR Partner, Microtek International, Inc. has determined that this scanner meets the ENERGY STAR guidelines for energy efficiency. Note: Please make sure that the electrical outlet to where the scanner will be connected is nearby and readily accessible. Copyright © 2005 Microtek Lab, Inc. [. . . ]