User manual MICROTEK GNC M RADARSENTRY 0606

[. . . ] Center the top of the original along the horizontal ruler of the scanner. Close the lid, and prepare to scan. Connect Scanner USB cable 120 Film Holder 4"x5" Film Holder To the power adapter A. Remove the yellow "Step 4" sticker from your scanner. Power cord Vinyl Strips Software CDs B. Connect the power cord to the back of the scanner. [. . . ] Skip this step if you have a newer version of Photoshop Elements already installed on your computer. Place the Microtek software CD-ROM into the CD-ROM drive, and take note of the following: · For OS X, double-click the ScanWizard Pro installer icon to install ScanWizard Pro first. Next, double-click the MSP installer icon to install the Microtek Scanner ICC Profiler (MSP) program. Finally, insert the IT8 Calibration Data CD, and double-click the IT8 installer icon to complete MSP installation. · For OS 9. x, double-click the ScanWizard Pro folder and installer icon to install ScanWizard Pro. Next, double-click the Scanner ICC Profiler folder and installer icon. Install the remaining software components, then restart your computer at the end of all software installation. NOTE: After rebooting your Macintosh, the Microtek software will attempt to locate your scanner on the system. Since this is your first install and you have not yet connected the scanner, simply ignore the message that appears and proceed to the next step. F D E Info window Power button NOTE: If your computer has both HiSpeed USB (USB 2. 0) and USB 1. 1 ports, connect the cable to the Hi-Speed USB port. Use the USB 1. 1 port only if your computer does not have Hi-Speed USB. Settings window Preview window when scanning photos (reflectives) Preview window when scanning transparencies Scan Job Queue window For details on how to connect using the alternate FireWire connection, refer to the ScanMaker i900 Supplement. TURN OVER TO CONTINUE How to Scan: Scanning Photos, Using DIGITAL ICE, and Scanning Film Scanning Non-Damaged Photos 1. Position the photo on the upper glass bed, as detailed in the "Position the Scan Material" section of the Start Here guide. · If asked to calibrate your scanner, you can skip this section for now and come back to it later. b) Follow steps 4 to 7 of the procedures detailed in "Scanning NonDamaged Photos" (the first column in this section). c) If the colors in your photo are faded and need restoring, check the Automatic Color Restoration box in the Settings window. d) To complete the scan, click the Scan (or "Batch") button in the Preview window. If scanning negatives: a) Go to the Preview window of ScanWizard Pro and from the Scan Material menu, choose Negative / Negative Film. b) Go to the Settings window and from the Film Type menu, choose the film type that matches the film you use. For more details, refer to a PDF document called "ScanWizard Pro Reference Manual" in your Microtek software CD-ROM and see the Addendum to ScanWizard Pro section. c) Follow steps 4 to 7 of the procedures detailed in "Scanning NonDamaged Photos" (the first column in this section). d) If the colors in your photo are faded and need restoring, check the Automatic Color Restoration box in the Settings window. e) To complete the scan, click the Scan (or "Batch") button in the Preview window. 3. If the colors in your photo are faded and need restoring, check the Automatic Color Restoration box in the Settings window. Click the Prescan button in the Preview window to display a detailed image of the area selected by the Scan Frame tool. [. . . ] Make sure your scanner is unlocked (see Step 3). Uninstall and reinstall the ScanWizard Pro software. Having trouble scanning negatives or slides?Make sure that you have properly inserted the Main Holder or the Glass Holder, as indicated in Steps A and B of the "Position the Scan Material" section of the Start Here guide. [. . . ]