User manual MICROTEK MHP1

[. . . ] www. microtek. com PLASMA DISPLAY USER MANUAL MHP1-HD Preface Copyright Copyright © 2005, Microtek International, Inc. , all rights reserved. This document may not be reproduced or copied in any way, stored electronically, or translated into any language, without the permission of Microtek International, Inc. Disclaimer The contents of this manual have been checked carefully for accuracy and every effort has been made to ensure that there are no errors. However, Microtek makes no guarantee as to the accuracy of the contents of this document and reserves the right to make changes to the contents without prior warning. FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. [. . . ] Alternatively, you can use composite video to connect to the Video 1 or Video 2 connections or SVideo cable to connect to the S-Video 1 or S-Video 2 connectors on the rear of the PDP. To receive DTV broadcasting programs: 1. Consult the user manual for the DTV set-top box if you need additional information. Press the TV/VIDEO button on the remote control or the SOURCE button on the PDP unit to view and set input sources. Select HDTV (YPbPr), Video 1, Video 2, S-Video 1 or S-Video 2 depending on the connection you have made between the set-top box and the PDP. 22 42" PLASMA DISPLAY Connecting to a Second PDP or Monitor You can send output from the PDP to a second PDP or other video device by connecting a composite video cable from the TV1 and Video 1 outputs on the rear of the PDP. To connect to a second PDP follow these steps: 1. Connect the Video Out output of the PDP to the video input of the secondary device using a composite video cable. Connect the audio (white and red) to Audio Out (L, R) connectors. Turn on the PDP and the second PDP or monitor. Set the second PDP to receive composite video input. Refer to the user manual of the second PDP or monitor for further details. NOTE: · · The output displayed on a second PDP is the same as the current input of the PDP. You can only connect to a second PDP using the Video Out/Audio Out connectors and composite cable. 23 Connecting to a Personal Computer You can use the PDP as a monitor for your PC. VGA is the most common type of computer connection; however, some computers also include DVI connections. To connect to a personal computer, follow these steps: 1. Connect the VGA or DVI cable from the computer to the VGA In or DVI In connections on the rear of the PDP unit. For audio, connect computer audio cable from the Line out of the PC to the Audio In on the rear panel of the PDP using a phono audio cable. Press the TV/VIDEO button on the remote control or the SOURCE button on the PDP unit to view and set input sources. Select VGA or DVI, depending on the connection you have made between the computer and the PDP. NOTE: · · To avoid burn-in, do not leave a still image on the screen for long periods of time. The PDP includes Plug-and-Play capability, which allows the computer to automatically adjust its settings to match those of the monitor. There may be some variations in the image due to different models or different versions of operating systems. If there are problems with the image, however, such as flicker or an unclear image, adjust computer settings using the PDP's on-screen menu. For flicker, you may need to adjust clock or phase settings; for an unclear image, you may need to adjust brightness or contrast. [. . . ] · Ensure that the batteries are not worn out. If necessary, replace with new batteries. · Strong or fluorescent lighting may interfere with remote control operation. Solution: · · · · Check connections. [. . . ]