User manual MICROTEK PC R SWPRO 1001

[. . . ] Microtek ScanWizard Pro Reference Manual for Windows i Copyright 2001 by Microtek International, Inc. All rights reserved. Trademarks Microtek®, ArtixTM, and ScanWizardTM Pro are trademarks or registered trademarks of Microtek International Inc. Adobe® and Acrobat® are registered trademarks of Adobe Systems Incorporated. Macintosh® and Apple® are registered trademarks of Apple Computer, Inc. Windows® is a registered trademark of Microsoft Corporation. [. . . ] Image Size The Size indicates how big the file will be when you accept the dimensions shown in the edit boxes, together with the resolution setting that you selected. Unit of Measurement The Unit of Measurement allows you to select your unit of measure. The Measurement options include inch, centimeter (cm), millimeter (mm), point, pixel, and pica. Keep Proportion The Keep Propor tion option allows you to keep the ratio of the image width Propor oportion and height constant. Transform (Rotate and Flip tool) Click the "F" icon to bring up rotate and horizontal image flip selections. The "F" icon represents the current selected orientation job. Image effect of the Flip tool applies to prescan and scanned image, not the overview image. Reference: The Settings Window 55 To use the Image Dimension controls 1. Select the unit of measurement Enter a value in the applicable edit boxes (width input, height input, scaling, width output, height output) Scan Frame width and Scan Frame height refer to the dimensions of the scan frame that you draw. For example, if the image on your scanner is 5" x 7" and you draw a scan frame that is 3" x 4", then your Scan Frame width will show 3. 00 and your Scan Frame height will show 4. 00. 3. The Scan Frame width, Scan Frame height, output width, and output height are affected by your scaling and whether you have checked the Keep Proportion option or not. To specify a name for frame: You may give a specific resolution a name for easier access. To begin, set the Width/Height of the scan frame, click the small triangle underneath the Resolution setting. A dialog box appears for your entering the frame name. Input a name you want, then choose Add to menu. You may also specify names for the Scaling and Output values. 56 Microtek ScanWizard Pro for Windows Advanced Image Correction Tools LCH Color Space Mode AIC Tools Native Color Space Mode AIC Tools Available Image Correction Effects ScanWizard Pro automatically locates all settings (default and the existing custom settings) from a specific directory, and made them available in the Advance Image Correction (AIC) dialog box. Not all image correction tools are available for all types of scan material and output images. Non-applicable AIC tools are dimmed when the selected image type is not supported by such tools. RGB CMYK Lab Gray Line-art B&W Diffusion Remark Dynamic Range White/Black Points Gradation Color Cast Saturation Selective Tone Curve Filter Descreen Brightness & Contrast Color Correction ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü * LCH mode only LCH mode only LCH mode only LCH mode only ü ü ü ü ü ** Native mode only Native mode only * For "Line-art" output, White/Black Points will switch to Threshold AIC tool. When output type is "B&W diffusion", this AIC tool is dimmed. **For negative films scan material, the Descreen AIC tool changes to Film Type selection. Reference: The Settings Window 57 Introducing the Image Correction tools With the image correction tools, you can edit the characteristics of your image during scan stage. The image correction tools in ScanWizard Pro save you time and provide you with the needed flexibility to adjust images right within the scanning software. Although you can use all the image correction tools, you don't need to use everyone of them to achieve a great image. Perhaps all that's needed is a change in the shadows or gamma curve. [. . . ] In this example, it is "Light GCR 300 UCR CMYK Japan Std. Note: When you've changed the CMS settings on ScanWizard Pro, keep in mind to update Photoshop's color settings to ensure color consistency. 3. 4. Photoshop 5. 0 Color Settings D-7 Entering CMYK setup information 1. Choose File, Color Settings, and CMYK Setup For CMYK Model, select ICC. 3. At the ICC Options (Profile), choose the printer profile that you've selected in ScanWizard Pro. In this example, Light GCR 300 UCR CMYK Japan Std. [. . . ]