User manual MICROTEK SW5 STAND ALONE STEPBYSTEP

[. . . ] See illustration below for proper placing of materials on the scanners flatbed. Front of Scanner Placing the reflective, positive and negative materials on the scanner's glass bed. Notice how the scan material can easily be aligned along the edges of the scanner's glass bed. [. . . ] Magnifying Your Preview Image. ScanWizard 5 allows as much as four times the size of your original preview image. The Zoom Scale bar (located at the right side of your preview image) is provided to easily accomplish zooming of your preview image. To zoom in, simply click on the zoom scale 6 9. Intended Size of Output Image By Default, ScanWizard 5-Standard scans your original into an actual size (100%) output image. To change the output image dimension, click on the Scale Output button. From the resulting menu, select the predefined scaled size that best matches your intended image output dimension. 12. Improving Image Before Final Scan When you scan your original image without making any adjustments of your own. ScanWizard 5-Standard will auto process to enhance the quality of your digitized image by using its default image editing settings. If you are not satisfied with what ScanWizard 5-Standard has done for you (as reflected in the preview image), you may modify the default artwork and apply your own image manipulation before final scanning by using the image correction tools panel under the Adjust button. When the image correction panel displays, adjust the preview image by dragging the pellet button of each tool along its groove. Observe a live update taking place with your preview image as you manipulate each of the image correction tools. To reset a correction tool back to its original position, click on the reset icon right end of each tool (see figure at right). 9 Note: that the new settings are automatically saved and will remain in effect for the subsequent scanning sessions (after a reboot) unless otherwise redefined or if they are reset to default settings (as explained in the following section). Output Image Setting Information As you perform adjustments and define various settings for the output of your original image (as reflected in preview image), scanWizard 5- Standard monitors and makes records of them. Part of the defined settings are displayed in the Status Bar (at the bottom of ScanWizard 5 window) as soon as changes are made, while a separate and more comprehensive record of the changes are kept at the same time. To view a complete record of your settings, click on the information icon [ I ] at the left end of Status Bar. The Image Information window then appears, listing all the current settings for your output image. If you have not made any adjustment, the default settings will display. Drag this corner to resize preview window Status bar showing summary settings for output image Click icon to display detailed info box (right) 10 14. Reset and Revert to Default Settings If you want to abandon the adjustments you have just made, you can easily revert to ScanWizard 5-Standard default settings and start all over again. [. . . ] Click on the Save button in the Microtek ScanWizard 5 ­ Scan to: Save As window and your scanner will scan your image. Then ScanWizard 5 will save it to the C:\Windows\Twain 32\ScanWiz 5\My Images directory under file name My New Photo. Finally it will open Adobe PhotoShop and display your newly scanned image. [. . . ]