User manual MICROTEK TAKE-IT 350

[. . . ] Copyright © 2000 Microtek International Inc. November 2000 Trademarks MicrotekTM is a registered trademarks of Microtek International Inc. Macintosh®, and Apple® are registered trademarks of Apple Computer Inc. Windows® is a trademark of Microsoft corporation. [. . . ] It uses energy-saving or "sleep" mode to control its power. If the camera is off, press the Function Mode button to turn the camera back on. 1 With the camera strap looped around your wrist, hold the camera by its grip. Look through the viewfinder and set up your picture. Adjust size of your composition by increasing or decreasing distance between camera and subject but not nearer than one meter. 2 Press the Shutter button to take a picture of your subject. A short beep sound emits at each click of the shutter to confirm that a shot has been taken and the camera is ready to take the next picture. NOTES: 26 or 107 shots mode is available with erase capability (see next page for details). After each shot, the LCD Panel will show the number of remaining shots available. For the mode, the LCD screen will only show "99" pictures. However, when you start to take the first 8 shots -- the no. of pictures taken (in between these 8 shots) will not be deducted from "99" until you take the 9th shot. WARNING: A warning beep (longer and lower tone compared to normal beep) will emit if exposure is too dark for a normal picture taking. No image is taken when this condition occurs. 5 Other Modes of Operation A. 107 Shots Mode This mode of operation allows you to take 107 shots of lower-resolution images in (320 x 240) QVGA format. To set your camera into 107 Shot modeLr" 1 Repeatedly press the Function Mode button until the "Lr icon is displayed on the Lr LCD Display Panel. Lr" 99" 2 Press the Shutter button and the "Lr icon becomes "99 which would indicate Lr 99 that the 106 Shot mode is ready. For the mode, the LCD screen will only show "99" pictures. However, when you start to take the first 8 shots -- the no. of pictures taken (in between these 8 shots) will not be deducted from "99" until you take the 9th shot. NOTE: Switching from 107 pictures mode to 26 pictures modes will not erase any images in the camera. If you attempt to continue shooting at the end of 107th shot, a repetitive beep will emit when you press the Shutter button. 107 Shots mode is ready only when the LCD Panel displays the "99 icon 99" 99 99 When the "Lr icon Lr" Lr appears on the LCD Panel, press Shutter to display the "99 icon 99" 99 Repeatedly press this Function Mode button until the "Lr icon is Lr" Lr displayed 6 B. 26 Shots Mode This mode of operation allows you to take 26 shots of images at higher resolution (640 x 480) VGA format. To set your camera back to 26 Shot mode after operating in 106 shots mode1 Repeatedly press the Function Mode button until the "Hr icon is displayed on the Hr" Hr LCD Display Panel. 26" 2 Press the Shutter button and the "Hr icon becomes "26 which would indicate Hr" Hr 26 that the 26 Shot mode is ready. WARNING: Switching from 26 pictures mode to 107 pictures modes will not erase any images in the camera. If you attempt to continue shooting at the end of 26th shot, a repetitive beep will emit when you press the Shutter button. 26 Shots mode is ready only when the LCD Panel displays the "26 icon 26" 26 26 When the "Hr icon Hr" Hr appears on the LCD Panel, press Shutter to display the "26 icon 26" 26 Repeatedly press this Function Mode button Hr until the "Hr icon is Hr" displayed 7 C. Continuous Shooting Mode This mode of operation allows you to take multiple frames of images when holding down the Shutter button while aiming at your subject. A maximum of 26 or 107 shots can be taken depending on which shooting mode you are in. [. . . ] For more details on how to enhance and incorporate special effects/filters to your images, refer to Photo Explorer's Help Explorer' er's menu. 16 Using Trellix Web Microtek Edition 1 Launch Tr ellix Web by doing the Web following in succession: Start button, Programs Tr Web eb. Programs -- Tr ellix Web 2 The Start Using Tr ellix Web dialog box Start Tr Web appears, select your preferred option for your web page from the dialog box, OK, click OK and then follow the instructions on your screen. 3 From the Tr ellix Web panel, click the Web section of the area where you want to position the image, choose the Insert menu, and then select Scanner or Image. Digital Camera Image 4 The Insert Scanner/Digital Camera Image dialog box appears, choose Camera, Take-it 350 Digital Camera and then click the Insert button to start downloading the images from your camera to your Take-it 350 Digital Camera interface. [. . . ]