User manual MIDLAND PMR446 TRANSCEIVER

[. . . ] Press " or # [2] buttons to skip the channels with a strong background noise. Transmission during the SCAN function At the PTT [7] pressure, the radio will transmit on the channel where the scan started. To deactivate this function, push the SCAN [4] key again. [. . . ] reception Simply release the PTT [7] button. When you receive a signal, display shows: Background noise reduction (Squelch). In your MIDLAND G5 the background noise reduction device (squelch) is activated by default. Automatic power save MIDLAND G5 is supplied with an automatic current economy circuit. If the transceiver receives no signal for 7 seconds or longer the "power save function" automatically activates [1]. the battery life may increase by up to 50 %. When the batteries are in need of charging, icon will be displayed: it is necesSélection des canaux Appuyez la touche [3] et puis "/# [2] pour sélectionner un des 8 canaux. Specifications are subject to change without notice. Battery compartment To open the battery compartment, hold the unit face down and slide the cover towards the bottom of the radio; then, insert 3 x AAA alkaline or rechargeable batteries. The only limitation to maximum possible range are environmental factors such as blockage caused by trees, buildings, or other obstructions. Inside a car or a metallic constructions, the range can be reduced. To confirm the setting, press the PTT [7] key or await 5 seconds approx. to deactivate CTCSS tones If you want no CTCSS code: 1. Press twice the [3] key until the display shows the desired channel and the CTCSS tone blinking on the right. Battery life up to 35 hours (alkaline type) · To turn radio on/off Hold the [3] button down for 3 seconds. the radio beeps 3 times with different tones (may be inhibited). The LCD [1] displays a "self-test" message for 1 second, it will then indicate the last channel selected. The display shows "VOX" blinking at the top on the left, while on the right of the channel number, "on" appears. [. . . ] To disperse after use, throw into the appropriate containers. Produced or imported by: ALAN UK Unit 2, Callenders, Paddington Drive, Churchward Park, Swindon, Wiltshire, SN5 7YW United Kingdom The use of this transceiver can be subject to national restrictions. Read the instructions carefully before installation and use. [. . . ]