User manual MIELE CS 1221I INDUCTION COMBISET CUSTOMIZED COOKING SURFACE OPERATING AND INSTALLATION MANUAL

[. . . ] Operating and Installation Instructions Ceramic combiset with Induction CS 1221 To prevent accidents and appliance damage, read these instructions before installation or use. en - US M. -Nr. 07 346 540 Contents IMPORTANT SAFETY INSTRUCTIONS. 25 IMPORTANT INSTALLATION SAFETY INSTRUCTIONS . 32 Installation of multiple appliances . [. . . ] Once the booster time has elapsed the burner will automatically revert to power level 9. The B indicator and I in the display will go out. Taking a pan off the burner while the booster is in operation interrupts the booster function. It will resume if a pan is placed back on the burner within 3 minutes. To activate the Booster ^ Turn the control knob past power level 9 to BI, then turn back to level 9. I appears in the display and the B indicator lights up. To deactivate the Booster function The booster function can be turned off early if desired. ^ Turn the control knob past power level 9 to BI and then back to 9; or simply reduce the power level. 17 Use Keep warm This function can be used for keeping food warm right after it has been cooked. It is not for reheating food which has already cooled. Once activated the keep warm function will switch off automatically after 2 hours. ­ It is not necessary to stir the food while it is being kept warm. ­ Nutrients are lost when food is cooked, therefore try to keep the warming time to a minimum. 18 Safety features Child Safety Lock Keep children away from the combiset for their own safety. The combiset has a Child Safety Lock to prevent children from turning on the burner. To activate the Child Safety Lock: ^ Turn the control knob counterclockwise as far as it will go, and hold until L appears in the display. If the control knob is touched after the lock is activated an L will appear in the display for 3 seconds. To deactivate the Child Safety Lock: ^ Turn the control knob counterclockwise as far as it will go, and hold until the L goes out and 0 appears briefly in the display. Power level 1 2 3 4 5 6 7 8 9 Maximum operating hours 10 5 5 4 3 2 2 2 1 Safety cut-out The combiset has a safety cut-out feature in case it is not turned off after use. If the burner is heated for an unusually long period of time (see table), and the power level settings are not adjusted, the combiset will turn itself off automatically and the residual heat indicator will light. C and 0 will flash alternately in the display. ^ To use the combiset again, first turn the control knob to "0". The On/Off indicator and the display will go out. 19 Safety features Overheating protection The induction coils and the cooling element of the electronics are fitted with an overheating protection feature. This prevents the induction coils and cooling element from overheating. [. . . ] ^ Connect the appliance / appliances to the main power supply (see "Electrical connection"). ^ Turn the appliance / appliances on and check the function. The appliance may be lifted out using a special tool. The appliance can also be pushed up and out from underneath. [. . . ]